Where the register points next
training.gov.au does not publish a supersession path from BCG20103. There is no chain to follow from here.
What the register says changed
training.gov.au publishes no mapping notes for BCG20103.
Is BCG20103 on your scope?
This page is the register's record of one product. What it cannot tell you is whether BCG20103 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What BCG20103 is made of
training.gov.au lists 16 units for BCG20103. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.
Units listed 16 listed
| Code | Unit | Core or elective | In this product |
|---|---|---|---|
| BCCCM2009B | Work in confined spaces | N/A | !not current |
| BCCCM2013B | Control traffic with a stop-slow bat | N/A | !not current |
| BCGCA2003B | Erect and dismantle formwork for footings and slabs on ground | N/A | !not current |
| BCGCM2002B | Carry out excavation | N/A | !not current |
| BCGCM2003B | Install trench support | N/A | !not current |
| BCGCM2007B | Use explosive power tools (EPT) | N/A | !not current |
| BCGCM3001B | Operate elevated work platforms | N/A | !not current |
| BCGCO3007B | Cut and core concrete | N/A | !not current |
| BCGPD2003B | Remove and replace doors and door and window furniture | N/A | !not current |
| BCGRI3001B | Operate personnel and materials hoists | N/A | !not current |
| BCGSP2003B | Prepare surfaces for plastering | N/A | !not current |
| BCGWC2004B | Complete penetrations and flashings | N/A | !not current |
| BCGWP2003B | Prepare for construction process (Waterproofing) | N/A | !not current |
| BCGWP2004B | Prepare surfaces for waterproofing application | N/A | !not current |
| BCPCM2013A | Weld using arc welding equipment | N/A | !not current |
| TDTD1097B | Operate a forklift | N/A | !not current |
The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every BCG training product on the register · Search all training products
Is BCG20103 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.