Where the register points next
training.gov.au does not publish a supersession path from BCP30303. There is no chain to follow from here.
What the register says changed
training.gov.au publishes no mapping notes for BCP30303.
Is BCP30303 on your scope?
This page is the register's record of one product. What it cannot tell you is whether BCP30303 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What BCP30303 is made of
training.gov.au lists 19 units for BCP30303. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.
Units listed 19 listed
| Code | Unit | Core or elective | In this product |
|---|---|---|---|
| BCF2009A | Carry out load slinging of off-site materials | N/A | !not current |
| BCGCM2003B | Install trench support | N/A | !not current |
| BCGCO2003B | Carry out concreting to simple forms | N/A | !not current |
| BCGWC3006B | Install acoustic and thermal environmental protection systems | N/A | !not current |
| BCPCM2009A | Cut with oxy-LPG/acetylene | N/A | !not current |
| BCPCM2012A | Weld using oxy-acetylene equipment | N/A | !not current |
| BCPCM2013A | Weld using arc welding equipment | N/A | !not current |
| BCPCM3002A | Weld polyethylene (PE) pipe using fusion method | N/A | !not current |
| BCPCM3003A | Fabricate and install non-ferrous pressure piping | N/A | !not current |
| BCPDR2001A | Locate and clear blockages | N/A | !not current |
| BCPDR2004A | Install stormwater and sub-soil drainage systems | N/A | !not current |
| BCPDR2005A | Drain worksite | N/A | !not current |
| BCPDR2006A | Install pre-fabricated inspection openings and enclosures | N/A | !not current |
| BCPMS3002A | Select and fit insulation and sheathing | N/A | !not current |
| BCPRF2003A | Collect and store roof water | N/A | !not current |
| BCPRF2004A | Fabricate roof coverings for curved structures | N/A | !not current |
| BCPRF3005A | Install roof coverings to curved roof structures | N/A | !not current |
| MEM549AA | Perform routine gas tungsten arc welding | N/A | !not current |
| MEM550AA | Perform routine gas metal arc welding | N/A | !not current |
The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every BCP training product on the register · Search all training products
Is BCP30303 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.