MSA30208 Certificate III in Manufacturing Technology

Where the register points next

training.gov.au points at nothing after MSA30208: it is the current product, and no replacement is listed.

This product is listed on the National Schedule of Training Product Development: under review by Manufacturing Industry Skills Alliance (Manufacturing Technology Review), with submission to the Assurance Body expected by 21 August 2026. That date has passed, so a revised product can reach the register at any time — but submission is not publication, and the record above is still what the register says today.

Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.

What the register says changed

training.gov.au publishes no mapping notes for MSA30208.

Is MSA30208 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSA30208 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSA30208 is made of

training.gov.au lists 89 units for MSA30208. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 89 listed

Code	Unit	Core or elective	In this product
AUM4003A	Interpret customer requirements	`N/A`	not current
FDFOP2005A	Work in a socially diverse environment	`N/A`	not current
LMTGN4002A	Participate in product engineering	`N/A`	not current
LMTGN4016A	Contribute to the development of products or processes	`N/A`	not current
MEM05051A	Select welding processes	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM30005A	Calculate force systems within simple beam structures	`N/A`	not current
MEM30006A	Calculate stresses in simple structures	`N/A`	not current
MEM30007A	Select common engineering materials	`N/A`	not current
MEM30008A	Apply basic economic and ergonomic concepts to evaluate engineering applications	`N/A`	not current
MEM30009A	Contribute to the design of basic mechanical systems	`N/A`	not current
MEM30010A	Set up basic hydraulic circuits	`N/A`	not current
MEM30011A	Set up basic pneumatic circuits	`N/A`	not current
MEM30012A	Apply mathematical techniques in a manufacturing engineering or related environment	`N/A`	not current
MEM30013A	Assist in the preparation of a basic workplace layout	`N/A`	not current
MEM30014A	Apply basic just in time systems to the reduction of waste	`N/A`	not current
MEM30015A	Develop recommendations for basic set up time improvements	`N/A`	not current
MEM30016A	Assist in the analysis of a supply chain	`N/A`	not current
MEM30017A	Use basic preventative maintenance techniques and tools	`N/A`	not current
MEM30018A	Undertake basic process planning	`N/A`	not current
MEM30019A	Use resource planning software systems in manufacturing	`N/A`	not current
MEM30020A	Develop and manage a plan for a simple manufacturing related project	`N/A`	not current
MEM30021A	Prepare a simple production schedule	`N/A`	not current
MEM30022A	Undertake supervised procurement activities	`N/A`	not current

Show the remaining 59 units

Code	Unit	Core or elective	In this product
MEM30023A	Prepare a simple cost estimate for a manufactured product	`N/A`	not current
MEM30024A	Participate in quality assurance techniques	`N/A`	not current
MEM30025A	Analyse a simple electrical system circuit	`N/A`	not current
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements	`N/A`	not current
MEM30032A	Produce basic engineering drawings	`N/A`	not current
MEM30033A	Use computer-aided design (CAD) to create and display 3-D models	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMSUP303A	Identify equipment faults	`N/A`	not current
MSATCM301A	Test the mechanical properties of materials	`N/A`	not current
MSATCM302A	Monitor ferrous melting and casting processes	`N/A`	not current
MSATCM303A	Monitor non-ferrous melting and casting processes	`N/A`	not current
MSATCM304A	Interpret basic binary phase diagrams	`N/A`	not current
MSATCM305A	Demonstrate basic knowledge of casting operations	`N/A`	not current
MSATCS301A	Interpret architectural and engineering design specifications for structural steel detailing	`N/A`	not current
MSATCS302A	Detail bolts and welds for structural steelwork connections	`N/A`	not current
MSL913001A	Communicate with other people	`N/A`	not current
MSL913002A	Plan and conduct laboratory/field work	`N/A`	not current
MSL922001A	Record and present data	`N/A`	not current
MSL933001A	Maintain the laboratory/field workplace fit for purpose	`N/A`	not current
MSL933002A	Contribute to the achievement of quality objectives	`N/A`	not current
MSL933003A	Apply critical control point requirements	`N/A`	not current
MSL934002A	Apply quality system and continuous improvement processes	`N/A`	not current
MSL943001A	Work safely with instruments that emit ionising radiation	`N/A`	not current
MSL943002A	Participate in laboratory/field workplace safety	`N/A`	not current
MSL952001A	Collect routine site samples	`N/A`	not current
MSL952002A	Handle and transport samples or equipment	`N/A`	not current
MSL953001A	Receive and prepare samples for testing	`N/A`	not current
MSL954001A	Obtain representative samples in accordance with sampling plan	`N/A`	not current
MSL963001A	Operate basic handblowing equipment	`N/A`	not current
MSL963002A	Repair glass apparatus using simple glassblowing equipment	`N/A`	not current
MSL973001A	Perform basic tests	`N/A`	not current
MSL973002A	Prepare working solutions	`N/A`	not current
MSL973003A	Prepare culture media	`N/A`	not current
MSL973004A	Perform aseptic techniques	`N/A`	not current
MSL973005A	Assist with fieldwork	`N/A`	not current
MSL973006A	Prepare trial batches for evaluation	`N/A`	not current
MSL973007A	Perform microscopic examination	`N/A`	not current
MSS402001A	Apply competitive systems and practices	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402051A	Apply quality standards	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS403002A	Ensure process improvements are sustained	`N/A`	not current
MSS403030A	Improve cost factors in work practices	`N/A`	not current
MSS403032A	Analyse manual handling processes	`N/A`	not current
PMAOPS350B	Match and adjust colour	`N/A`	not current
PMBPREP206C	Prepare materials to formulae	`N/A`	not current
PMBPREP301C	Set up and prepare for production	`N/A`	not current
PMBPREP303C	Set up equipment for continuous operation	`N/A`	not current
PMBPREP304C	Set a die	`N/A`	not current
PMBPROD235C	Use materials and process knowledge to complete work operations	`N/A`	not current
PMBTECH301B	Use material and process knowledge to solve problems	`N/A`	not current
PMBTECH302A	Modify existing compounds	`N/A`	not current
PMBTECH303A	Make minor modifications to products	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MSA30208 or anything else on it is superseded.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.