PMC30204 Certificate III in Production Support

Where the register points next

training.gov.au does not publish a supersession path from PMC30204. There is no chain to follow from here.

What the register says changed

training.gov.au publishes no mapping notes for PMC30204.

Is PMC30204 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMC30204 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMC30204 is made of

training.gov.au lists 32 units for PMC30204. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 32 listed

Code	Unit	Core or elective	In this product
PMAOHS100B	Follow OHS procedures	`N/A`	not current
PMAOHS110B	Respond to emergency situation	`N/A`	not current
PMAOHS200B	Participate in workplace OHS procedures	`N/A`	not current
PMAPER200C	Work in accordance with an issued permit	`N/A`	not current
PMAPER201C	Monitor and control work permits	`N/A`	not current
PMAPER205B	Enter confined space	`N/A`	not current
PMASUP100B	Apply workplace procedures	`N/A`	not current
PMASUP110A	Relay and respond to information	`N/A`	not current
PMASUP120A	Follow environmental work practices	`N/A`	not current
PMASUP130B	Follow established work plan	`N/A`	not current
PMASUP200B	Implement production efficiencies	`N/A`	not current
PMASUP210A	Process and record information	`N/A`	not current
PMASUP220A	Monitor and control environmental hazards	`N/A`	not current
PMCCOR102A	Clean plant and equipment	`N/A`	not current
PMCSUP170B	Shift materials safely	`N/A`	not current
PMCSUP171B	Pack finished products	`N/A`	not current
PMCSUP172B	Store materials for production	`N/A`	not current
PMCSUP180A	Organise self	`N/A`	not current
PMCSUP181A	Work in a team	`N/A`	not current
PMCSUP270A	Move materials	`N/A`	not current
PMCSUP271B	Operate bulk materials handling equipment	`N/A`	not current
PMCSUP272A	Identify and act upon hazards in the workplace	`N/A`	not current
PMCSUP273A	Receive and despatch materials	`N/A`	not current
PMCSUP274B	Undertake minor maintenance	`N/A`	not current
PMCSUP275A	Maintain kiln refractory	`N/A`	not current
PMCSUP280A	Manage conflict at work	`N/A`	not current
PMCSUP281A	Deliver customer service	`N/A`	not current
PMCSUP282A	Use computers and related programs in the workplace	`N/A`	not current
PMCSUP283B	Allocate and complete team tasks	`N/A`	not current
PMCSUP292A	Sample and test materials and product	`N/A`	not current

Show the remaining 2 units

Code	Unit	Core or elective	In this product
TDTC497C	Drive heavy rigid vehicle	`N/A`	not current
TDTD1097B	Operate a forklift	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Take this with you — one email with how the register lists PMC30204 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is PMC30204 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.