PRM40704 Certificate IV in Asset Maintenance (Fire Safety Systems Inspection)

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in PRM40704 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for PRM40704, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
PRM04 — ASSET MAINTENANCE TRAINING PACKAGE
Currency period ends
5 April 2011
Latest release
Release 1 · 30 March 2009
Supersedes
nothing — no earlier product listed
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from PRM40704. There is no chain to follow from here.

What the register says changed

training.gov.au publishes no mapping notes for PRM40704.

Official documents on the register

What training.gov.au lists for PRM40704 and for its training package PRM04 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • PRM40704_R1.pdfPRM40704 release 1 · product document · published 24 September 2012
  • PRM40704_R1.docxPRM40704 release 1 · product document · published 26 November 2024

Is PRM40704 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PRM40704 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PRM40704 is made of

training.gov.au lists 26 units for PRM40704. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 26 listed

CodeUnitCore or electiveIn this product
BSBFIA402AReport on financial activityN/Anot current
BSBITS401AMaintain business technologyN/Anot current
BSBMKG507AInterpret Market Trends And DevelopmentsN/Anot current
BSBSMB401AEstablish legal and risk management requirements of small businessN/Anot current
BSBSMB402APlan small business financesN/Anot current
BSBSMB403AMarket the small businessN/Anot current
BSBSMB404AUndertake small business planningN/Anot current
BSBSMB405AMonitor and manage small business operationsN/Anot current
BSBSMB406AManage small business financesN/Anot current
PRMFSSI01ACommunicate effectively with fire safety system personnelN/Anot current
PRMFSSI02AIdentify fire safety system inspection requirementsN/Anot current
PRMFSSI03AReview pre-installation fire safety system documentationN/Anot current
PRMFSSI04AAssess fire safety system documentation for complianceN/Anot current
PRMFSSI05AIdentify, locate and match installed fire safety system to documentationN/Anot current
PRMFSSI06AFollow on-site occupational health and safety requirementsN/Anot current
PRMFSSI07AValidate commissioning test data against performance documentationN/Anot current
PRMFSSI08AValidate installation, testing and maintenance of fire safety systemsN/Anot current
PRMFSSI09ANegotiate and resolve issues regarding non-compliance of fire safety systemsN/Anot current
PUAFIR314AUtilise installed fire safety systemsN/Anot current
PUAFIR404AInspect dangerous goods facilitiesN/Anot current
PUAFIR405ACollect, analyse and provide regulatory information (adapted from PUACOM003A (Police))N/Anot current
PUAPOL016AManage riskN/Anot current
TAAASS401CPlan and organise assessmentN/Anot current
TAAASS402CAssess competenceN/Anot current
TAAASS404BParticipate in assessment validationN/Anot current
TAADEL301CProvide training through instruction and demonstration of work skillsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PRM training product on the register · Search all training products

Take this with you — one email with how the register lists PRM40704 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is PRM40704 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.