AHC32111 Certificate III in Commercial Seed Processing

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for AHC32111 ended on 16 December 2013 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 18 December 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding AHC32113 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
AHC10 — Agriculture, Horticulture and Conservation and Land Management
Currency period ends
16 December 2013
Latest release
Release 3 · 1 March 2013 · 3 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
AHC32113 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AHC32111Superseded — not equivalentCertificate III in Commercial Seed Processing
  2. not equivalent
  3. AHC32113Superseded — equivalentCertificate III in Commercial Seed Processing
  4. equivalent
  5. AHC32116Deleted from the registerCertificate III in Commercial Seed Processing

The register does not list a current endpoint for this chain: AHC32116 is the last product it points at, and AHC32116 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AHC32111AHC32113not equivalent17 December 2013

    Changes to packaging rules and qualification core.

Official documents on the register

What training.gov.au lists for AHC32111 and for its training package AHC10 (release 8.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • AHC32111_R3.pdfAHC32111 release 3 · product document · published 2 March 2013
  • AHC32111_R3.docxAHC32111 release 3 · product document · published 26 November 2024

Is AHC32111 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AHC32111 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AHC32111 is made of

training.gov.au lists 12 units for AHC32111: 6 core and 6 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
AHCOHS301AContribute to OHS processesnot current
AHCSPO301AOperate a screen cleaner for seed processingnot current
AHCSPO302AOperate an indent cylindernot current
AHCSPO303AOperate a gravity tablenot current
AHCSPO307AHandle, package and store commercial quantities of seednot current
AHCSPO308ASample seed before and after processingnot current

Elective units 6 listed

CodeUnitIn this product
AHCAGB301AKeep records for a primary production businessnot current
AHCSPO304AOperate seed modification machinerynot current
AHCSPO305AOperate seed treatment machinerynot current
AHCSPO306AOperate specialised seed processing machinerynot current
AHCWRK313AImplement and monitor environmentally sustainable work practicesnot current
TLILIC2001ALicence to operate a forklift trucknot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AHC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AHC32111 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.