AHC33311 Certificate III in Feedlot Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for AHC33311 ended on 25 June 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 June 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AHC10 — Agriculture, Horticulture and Conservation and Land Management
Currency period ends
25 June 2016
Latest release
Release 4 · 18 December 2013 · 4 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
AHC33316 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AHC33311Superseded — equivalentCertificate III in Feedlot Operations
  2. equivalent
  3. AHC33316Superseded — not equivalentCertificate III in Feedlot Operations
  4. not equivalent
  5. AHC33325CurrentCertificate III in Feedlot Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AHC33311AHC33316equivalent26 June 2016

    This qualification is equivalent to AHC33311 Certificate III in Feedlot Operations

Official documents on the register

What training.gov.au lists for AHC33311 and for its training package AHC10 (release 8.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • AHC33311_R4.pdfAHC33311 release 4 · product document · published 18 December 2013
  • AHC33311_R4.docxAHC33311 release 4 · product document · published 26 November 2024

Is AHC33311 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AHC33311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AHC33311 is made of

training.gov.au lists 33 units for AHC33311: 6 core and 27 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
AHCBIO302AIdentify and report unusual disease or plant pest signsnot current
AHCCHM303APrepare and apply chemicalsnot current
AHCCHM304ATransport, handle and store chemicalsnot current
AHCOHS301AContribute to OHS processesnot current
AHCWRK209AParticipate in environmentally sustainable work practicesnot current
AHCWRK306AComply with industry quality assurance requirementsnot current

Elective units 27 listed

CodeUnitIn this product
AHCBAC204APrepare grain storagesnot current
AHCBAC303APrepare to receive grains/seedsnot current
AHCINF204AFabricate and repair metal or plastic structuresnot current
AHCINF301AImplement property improvement, construction and repairnot current
AHCLSK213AClean out production shedsnot current
AHCLSK301AAdminister medication to livestocknot current
AHCLSK304ACarry out post-mortem examination of livestocknot current
AHCLSK307AEuthanase livestocknot current
AHCLSK308AIdentify and draft livestocknot current
AHCLSK309AImplement animal health control programsnot current
AHCLSK310AImplement feeding plans for intensive productionnot current
AHCLSK326AMix and mill standard stockfeednot current
AHCLSK328ARemove and facilitate reuse of effluent and manure from an intensive production systemnot current
AHCLSK332AMonitor animals in intensive production systemsnot current
AHCLSK333AMonitor pen condition and ration suitabilitynot current
AHCMOM205AOperate vehiclesnot current
AHCMOM207AConduct front-end loader operationsnot current
AHCMOM301ACoordinate machinery and equipment maintenance and repairnot current
AHCMOM302APerform machinery maintenancenot current
AHCMOM305AOperate specialised machinery and equipmentnot current
AHCPHT307APrepare raw materials and compost the feedstocksnot current
AHCPMG301AControl weedsnot current
AHCWRK308AHandle bulk materials in storage areanot current
AHCWRK313AImplement and monitor environmentally sustainable work practicesnot current
FDFGR3002ADemonstrate knowledge of animal nutrition principlesnot current
FDFOP2038AOperate a grinding processnot current
RIIWHS202DEnter and work in confined spacesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AHC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AHC33311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.