Can an RTO still enrol new students in AUM30108?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 29 June 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in AUM30108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUM30108 Certificate III in Automotive Manufacturing - Manufacturing…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUM30108Superseded — equivalentCertificate III in Automotive Manufacturing - Manufacturing Specialist (Passenger Motor Vehicle)
equivalent
AUM30112Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Passenger Motor Vehicle
equivalent
AUM30113Deleted from the registerCertificate III in Automotive Manufacturing Technical Operations - Passenger Motor Vehicle

The register does not list a current endpoint for this chain: AUM30113 is the last product it points at, and AUM30113 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUM30108AUM30112equivalent28 June 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUM30108 and for its training package AUM08 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

AUM30108_R1.docxAUM30108 release 1 · product document · published 26 November 2024
AUM30108_R1.pdfAUM30108 release 1 · product document · published 24 September 2012

Is AUM30108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM30108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM30108 is made of

training.gov.au lists 41 units for AUM30108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 41 listed

Code	Unit	Core or elective	In this product
AUM3020A	Influence and lead work groups in an automotive manufacturing environment	`N/A`	not current
AUM3021A	Sustain quality standards	`N/A`	not current
AUM3022A	Reduce cycle time in work processes	`N/A`	not current
AUM3023A	Reduce waste in work processes	`N/A`	not current
AUM3024A	Undertake preliminary fault finding and machine reset	`N/A`	not current
AUM3025A	Apply visual factory principles and practices to an automotive manufacturing environment	`N/A`	not current
AUM3026A	Maintain a safe automotive manufacturing work environment	`N/A`	not current
AUM8001B	Contribute to workplace relationships and processes	`N/A`	not current
AUM8013A	Participate in workplace productivity	`N/A`	not current
AUM8021B	Inspect work and apply organisation technical quality standards	`N/A`	not current
AUMNT3001B	Rectify faults in vehicle metal components	`N/A`	not current
AUMNT3002B	Rectify paintwork	`N/A`	not current
AUMNT3003B	Control paint line production processes	`N/A`	not current
AUMNT3004B	Conduct engine hot test	`N/A`	not current
AUMNT3005B	Rework production engines	`N/A`	not current
AUMNT3006B	Rectify mechanical faults on assembled vehicles	`N/A`	not current
AUMNT3007B	Rectify electrical faults on assembled vehicles	`N/A`	not current
AUMNT3008B	Rectify assembly faults in assembled vehicles	`N/A`	not current
AUMNT3009B	Conduct die coating	`N/A`	not current
AUMNT3010B	Conduct structural rectification of vehicle bodies	`N/A`	not current
AUMNT3011B	Test welds ultrasonically	`N/A`	not current
AUMNT3012B	Conduct tool setting	`N/A`	not current
AUMNT3013B	Monitor and maintain metals treatment plant operations	`N/A`	not current
BSBCMN311B	Maintain workplace safety	`N/A`	not current
BSBDIV301A	Work effectively with diversity	`N/A`	not current
BSBINM301A	Organise workplace information	`N/A`	not current
BSBINM302A	Utilise a knowledge management system	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMT220A	Apply quick changeover procedures	`N/A`	not current

Show the remaining 11 units

Code	Unit	Core or elective	In this product
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT231A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSACMT421A	Facilitate a Just in Time (JIT) system	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
MSL973001A	Perform basic tests	`N/A`	not current
MSL973007A	Perform microscopic examination	`N/A`	not current
TLIA1707C	Apply product knowledge to organise work operations	`N/A`	not current
TLIA2307C	Coordinate stocktakes	`N/A`	not current
TLIA2807C	Assess and monitor optimum stock levels	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUM30108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.