Can an RTO still enrol new students in AUM40108?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 29 June 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in AUM40108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUM40108 Certificate IV in Automotive Manufacturing - Automotive…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUM40108Superseded — not equivalentCertificate IV in Automotive Manufacturing - Automotive Development (Passenger Motor Vehicle)
not equivalent
AUM40112Superseded — equivalentCertificate IV in Automotive Manufacturing
equivalent
AUM40113Deleted from the registerCertificate IV in Automotive Manufacturing

The register does not list a current endpoint for this chain: AUM40113 is the last product it points at, and AUM40113 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUM40108AUM40112not equivalent28 June 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUM40108 and for its training package AUM08 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

AUM40108_R1.docxAUM40108 release 1 · product document · published 26 November 2024
AUM40108_R1.pdfAUM40108 release 1 · product document · published 24 September 2012

Is AUM40108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM40108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM40108 is made of

training.gov.au lists 25 units for AUM40108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 25 listed

Code	Unit	Core or elective	In this product
AUM4001A	Analyse a test vehicle for research purposes	`N/A`	not current
AUM4002A	Provide technical advice	`N/A`	not current
AUM4004A	Use measuring equipment	`N/A`	not current
AUM4005A	Use sensors to acquire motor vehicle data for development purposes	`N/A`	not current
AUM4006A	Calibrate measuring equipment in Automotive Development	`N/A`	not current
AUM4007A	Test plant, tooling, equipment, product or systems	`N/A`	not current
AUM4008A	Install plant equipment or systems	`N/A`	not current
AUM4009A	Maintain plant, tooling, equipment or systems	`N/A`	not current
AUM4010A	Repair plant, tooling, equipment or systems	`N/A`	not current
AUM4011A	Manufacture or modify plant, tooling, equipment or systems	`N/A`	not current
AUM4012A	Apply quality assurance techniques	`N/A`	not current
AUM4013A	Interpret manuals, drawings and/or circuits for plant, tooling, equipment or systems	`N/A`	not current
AUM4014A	Program and monitor computerised equipment	`N/A`	not current
AURM441293A	Analyse and repair complex performance driveline systems	`N/A`	not current
AURM441393A	Analyse and repair complex performance fuel systems	`N/A`	not current
AURM441976A	Test engines using a dynamometer	`N/A`	not current
AURT466208A	Carry out diagnosis of complex system faults	`N/A`	not current
AURT477093A	Analyse and evaluate gas fuel system faults	`N/A`	not current
BSBOHS401B	Contribute to the implementation of a systematic approach to managing OHS	`N/A`	not current
BSBPMG403A	Apply cost management techniques	`N/A`	not current
BSBRKG304B	Maintain business records	`N/A`	not current
BSBRSK401A	Identify risk and apply risk management processes	`N/A`	not current
ICAU1204B	Locate and use relevant on-line information	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUM40108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.