Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is AUR10112 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR10112 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR10112 is made of
training.gov.au lists 34 units for AUR10112: 8 core and 26 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 8 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA1001 | Identify environmental requirements in an automotive workplace | !not current |
| AURASA1001 | Apply automotive workplace safety fundamentals | !not current |
| AURBTJ2001 | Remove, repair and fit bicycle tyres | !not current |
| AURETR1003 | Apply automotive electrical system fundamentals | !not current |
| AURJTA1002 | Remove and replace motorcycle components and accessories | !not current |
| AURLTA1001 | Apply automotive mechanical system fundamentals | !not current |
| AURTTK2002 | Use and maintain workplace tools and equipment | !not current |
| AURVTN2008 | Clean vehicle body and door cavities | !not current |
Elective units 26 listed
| Code | Unit | In this product |
|---|---|---|
| AURAFA2001 | Use numbers in an automotive workplace | !not current |
| AURAFA2002 | Read in an automotive workplace | !not current |
| AURBTA1001 | Remove and tag bicycle components | !not current |
| AURBTA1002 | Adjust bicycles | !not current |
| AURETK1001 | Identify, select and use low voltage electrical test equipment | !not current |
| AURETR1001 | Remove and tag automotive electrical system components | !not current |
| AURETR2006 | Carry out soldering of electrical wiring and circuits | !not current |
| AURHTA1001 | Carry out heavy vehicle pre-repair operations | !not current |
| AURHTA2003 | Remove and replace heavy commercial vehicle ancillary components and accessories | !not current |
| AURHTJ1001 | Inspect heavy commercial vehicle wheels and tyres | !not current |
| AURJTA1001 | Perform minor adjustments to motorcycles | !not current |
| AURJTJ2001 | Remove, inspect and fit motorcycle wheel assemblies | !not current |
| AURLTJ2003 | Remove, inspect, and refit light vehicle wheel assemblies | !not current |
| AURPTA1001 | Carry out pre-repair operations to outdoor power equipment | !not current |
| AURPTA1002 | Perform minor adjustments to outdoor power equipment | !not current |
| AURPTA2006 | Service line trimming systems and components | !not current |
| AURRTE1001 | Prepare outboard engines for wet-run testing | !not current |
| AURRTQ2001 | Service inboard propeller drive systems | !not current |
| AURRTR1001 | Inspect, service and maintain marine battery storage systems | !not current |
| AURTTA1001 | Remove and tag steering, suspension and brake system components | !not current |
| AURTTA1002 | Carry out workshop practice activities | !not current |
| AURTTA1003 | Use and maintain basic measuring devices | !not current |
| AURTTA2009 | Carry out pre-repair operations (mechanical) | !not current |
| AURTTE1003 | Remove and tag engine system components | !not current |
| AURVTN1001 | Remove and tag vehicle body system components | !not current |
| AURVTP2006 | Prepare vehicle components for paint repairs | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Is AUR10112 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.