AUR20816 Certificate II in Outdoor Power Equipment Technology

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUR20816 ended on 11 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 13 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUR — Automotive Retail, Service and Repair Training Package
Currency period ends
11 November 2020
Latest release
Release 1 · 14 April 2016
Supersedes
AUR20812
Superseded by
AUR20820 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUR20816Superseded — equivalentCertificate II in Outdoor Power Equipment Technology
  2. equivalent
  3. AUR20820CurrentCertificate II in Outdoor Power Equipment Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR20812AUR20816equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

  • AUR20816AUR20820equivalent12 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUR20816 and for its training package AUR (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is AUR20816 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR20816 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR20816 is made of

training.gov.au lists 23 units for AUR20816: 8 core and 15 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 8 listed

CodeUnitIn this product
AURAEA002Follow environmental and sustainability best practice in an automotive workplacecurrent
AURAFA001Use numbers in an automotive workplacecurrent
AURAFA002Read and respond to automotive workplace informationcurrent
AURASA002Follow safe working practices in an automotive workplacenot current
AURETR006Solder electrical wiring and circuitscurrent
AURETR015Inspect, test and service batteriesnot current
AURPTE002Inspect and service outdoor power equipment enginesnot current
AURTTK002Use and maintain tools and equipment in an automotive workplacenot current

Elective units 15 listed

CodeUnitIn this product
AURPTA001Carry out pre-repair operations to outdoor power equipmentnot current
AURPTA002Carry out minor adjustments to outdoor power equipmentnot current
AURPTA003Service and repair rotary cutting systemsnot current
AURPTA004Service and repair drum cutting systemsnot current
AURPTA005Service and repair chainsaw cutting systemsnot current
AURPTA006Inspect and service line trimming systems and componentsnot current
AURPTA007Service and repair post boring systemsnot current
AURPTA008Service and repair post hole digging systemsnot current
AURPTA009Service and repair reciprocating cutting systemsnot current
AURPTA010Inspect and service pumping systemsnot current
AURPTA011Diagnose and repair pumping systemsnot current
AURPTE003Diagnose and repair outdoor power equipment enginesnot current
AURPTR001Test and service 240 volt portable generatorsnot current
AURTTF001Inspect and service petrol fuel systemsnot current
AURTTX002Inspect and service manual transmissionsnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUR20816 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.