AUR20912 Certificate II in Automotive Body Repair Technology

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUR20912 ended on 12 April 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 14 April 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUR12 — Automotive Industry Retail, Service and Repair Training Package
Currency period ends
12 April 2016
Latest release
Release 1 · 17 January 2013
Supersedes
AUR20905
Superseded by
AUR20916 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUR20912Superseded — equivalentCertificate II in Automotive Body Repair Technology
  2. equivalent
  3. AUR20916Superseded — equivalentCertificate II in Automotive Body Repair Technology
  4. equivalent
  5. AUR20920CurrentCertificate II in Automotive Body Repair Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR20905AUR20912not equivalent16 January 2013

    The register records this supersession but attaches no note on what changed.

  • AUR20912AUR20916equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

Is AUR20912 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR20912 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR20912 is made of

training.gov.au lists 58 units for AUR20912: 5 core and 52 elective, and 1 unit it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
AURAFA2002Read in an automotive workplacenot current
AURAMA2001Work effectively with othersnot current
AURASA2002Apply safe working practices in an automotive workplacenot current
AURTTK2002Use and maintain workplace tools and equipmentnot current
AURVEN2001Apply environmental regulations and best practice in the body repair industrynot current

Elective units 52 listed

CodeUnitIn this product
AURAFA2001Use numbers in an automotive workplacenot current
AURETH3001Depower battery electric vehiclesnot current
AURETR2042Remove, refit and test electrical componentry for operation following body repair activitiesnot current
AURETR3025Test, charge and replace batteriesnot current
AURETU2002Recover vehicle refrigerantsnot current
AURLTJ2003Remove, inspect, and refit light vehicle wheel assembliesnot current
AURVLN2001Apply legal requirements for vehicle dismantlersnot current
AURVTA2001Prepare vehicle, components and equipment for customer usenot current
AURVTG2001Repair laminated glassnot current
AURVTG2002Remove and install rubber glazed windscreensnot current
AURVTG2003Remove and install butyl sealed windscreensnot current
AURVTG2004Remove and install direct glazed windscreensnot current
AURVTG2006Apply window tintingnot current
AURVTG2007Clean glass surfacesnot current
AURVTG3009Remove and install fixed body glassnot current
AURVTG3010Remove and install movable body glassnot current
AURVTG3011Install side windowsnot current
AURVTK2001Use and maintain vehicle body repair hand toolsnot current
AURVTN2002Carry out panel repairsnot current
AURVTN2003Carry out pre-repair vehicle body operationsnot current
AURVTN2004Remove, replace and realign bolt-on panels, sections and fittingsnot current
AURVTN2005Remove and fit protector mouldings, transfers and decalsnot current
AURVTN2007Remove salvageable componentsnot current
AURVTN2008Clean vehicle body and door cavitiesnot current
AURVTN2009Clean vehicle engine and engine compartmentnot current
AURVTN2010Clean vehicle underbodynot current
AURVTN2011Remove and install rear vision mirrorsnot current
AURVTN2037Disassemble and test vehicle units and componentsnot current
AURVTN3013Carry out paint-less dent repairsnot current
AURVTN3016Repair body panels incorporating fillernot current
Show the remaining 22 elective units
CodeUnitIn this product
AURVTP2001Apply paint removal methodsnot current
AURVTP2002Carry out masking proceduresnot current
AURVTP2003Prepare spray painting materials and equipmentnot current
AURVTP2005Apply rust prevention and sound deadening materialsnot current
AURVTP2006Prepare vehicle components for paint repairsnot current
AURVTP2008Clean and polish vehicle exterior paintnot current
AURVTP3010Prepare spray booths and paint drying equipmentnot current
AURVTP3013Prepare substrate for refinishingnot current
AURVTP3019Prepare and paint plastic componentsnot current
AURVTP3020Carry out denibbing, buffing and polishingnot current
AURVTP3021Restore vehicle exterior paintnot current
AURVTT2002Carry out trim repairs and alterationsnot current
AURVTT2003Remove and replace vehicle interior trim componentsnot current
AURVTT2004Trim vehicle componentsnot current
AURVTT2005Select and apply trim and fabric materialsnot current
AURVTT2006Select and apply trim and fabric adhesivesnot current
AURVTT2007Clean and finish plastic trim and fittingsnot current
AURVTT2008Clean and finish vehicle interior trim and seatsnot current
AURVTT2009Remove and replace seats and internal fittingsnot current
AURVTT3021Select and use adhesivesnot current
AURVTW2003Carry out gas metal arc welding proceduresnot current
AURVTW2007Conduct oxy-acetylene, thermal heating and cuttingnot current

Units the register marks neither core nor elective 1 listed

CodeUnitCore or electiveIn this product
AURVTT2001Carry out sewing repairs and alterationsN/Anot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Is AUR20912 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.