When must new enrolments into AUR30511 stop?

New enrolments are not permitted from 17 January 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in AUR30511?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUR30511 Certificate III in Marine

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUR30511Superseded — not equivalentCertificate III in Marine
not equivalent
AUR30512Superseded — not equivalentCertificate III in Marine Mechanical Technology
not equivalent
AUR30514Superseded — equivalentCertificate III in Marine Mechanical Technology
equivalent
AUR30516Superseded — not equivalentCertificate III in Marine Mechanical Technology
not equivalent
AUR30520CurrentCertificate III in Marine Mechanical Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUR30505AUR30511equivalent20 June 2011
The register records this supersession but attaches no note on what changed.
AUR30511AUR30512not equivalent16 January 2013
The register records this supersession but attaches no note on what changed.

Is AUR30511 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR30511 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR30511 is made of

training.gov.au lists 136 units for AUR30511. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 136 listed

Code	Unit	Core or elective	In this product
AURC251179A	Write routine texts in the workplace and complete automotive documentation	`N/A`	not current
AURC251356A	Read in the workplace	`N/A`	not current
AURC251677A	Use numbers in the workplace	`N/A`	not current
AURC252103A	Apply basic automotive troubleshooting processes	`N/A`	not current
AURC252327A	Identify, clarify and resolve problems	`N/A`	not current
AURC261314A	Contribute to quality work outcomes	`N/A`	not current
AURC270103A	Apply safe working practices	`N/A`	not current
AURC270688A	Work effectively with others	`N/A`	not current
AURC270789A	Communicate effectively in the workplace	`N/A`	not current
AURC270889A	Communicate business information	`N/A`	not current
AURC272003A	Apply environmental regulations and best practice in a workplace or business	`N/A`	not current
AURC359350A	Conduct information sessions	`N/A`	not current
AURC359554A	Provide technical guidance	`N/A`	not current
AURC361101A	Adapt work processes to new technologies	`N/A`	not current
AURC361230A	Inspect technical quality of work	`N/A`	not current
AURC361337A	Maintain quality systems	`N/A`	not current
AURE218664A	Remove and replace electrical/electronic units/assemblies	`N/A`	not current
AURE218670A	Service, maintain or replace batteries	`N/A`	not current
AURE218676A	Test, service and charge batteries	`N/A`	not current
AURE218708A	Carry out repairs to single electrical circuits	`N/A`	not current
AURE219331A	Install, test and repair low voltage wiring/lighting systems	`N/A`	not current
AURE219531A	Install ancillary electrical components	`N/A`	not current
AURE220140A	Manufacture and repair wiring harness/looms	`N/A`	not current
AURE224008A	Carry out soldering of electrical wiring/circuits	`N/A`	not current
AURE311666A	Repair electric braking systems	`N/A`	not current
AURE318866A	Repair electrical systems	`N/A`	not current
AURE318966A	Repair instruments and warning systems	`N/A`	not current
AURE319145A	Overhaul charging system alternators	`N/A`	not current
AURE319166B	Repair charging systems	`N/A`	not current
AURE319245A	Overhaul starting motors	`N/A`	not current

Show the remaining 106 units

Code	Unit	Core or elective	In this product
AURE319266B	Repair starting systems	`N/A`	not current
AURE320031B	Install marine electrical systems and components	`N/A`	not current
AURE320066B	Diagnose and repair marine electrical systems and components	`N/A`	not current
AURE320666B	Repair ignition systems	`N/A`	not current
AURE321171A	Service and repair electronic spark ignition engine management systems	`N/A`	not current
AURE321771A	Service and repair electronic compression ignition engine management systems	`N/A`	not current
AURE321831B	Install marine electronic systems and components	`N/A`	not current
AURE321832A	Test, diagnose and repair marine electronic systems and components	`N/A`	not current
AURE321971A	Inspect, service and repair electronic management, monitoring and tracking systems	`N/A`	not current
AURR201103A	Service outboard engines and components	`N/A`	not current
AURR201104A	Service inboard engines and components	`N/A`	not current
AURR207670B	Service marine outboard and stern drive transmissions	`N/A`	not current
AURR207770B	Service marine inboard transmissions	`N/A`	not current
AURR213670A	Service inboard propeller drive systems	`N/A`	not current
AURR214170B	Service jet drive propulsion systems	`N/A`	not current
AURR246870B	Service deck, hull and cabin equipment	`N/A`	not current
AURR271103A	Apply environmental regulations in the marine service industry	`N/A`	not current
AURR301102A	Diagnose and repair outboard engines and components	`N/A`	not current
AURR301105A	Diagnose and repair inboard engines and components	`N/A`	not current
AURR307684B	Diagnose and repair marine outboard and stern drive transmissions	`N/A`	not current
AURR307784B	Diagnose and repair marine inboard transmissions	`N/A`	not current
AURR313631A	Install inboard propeller drive systems	`N/A`	not current
AURR313684B	Diagnose and repair inboard propeller drive systems	`N/A`	not current
AURR314131B	Install jet drive propulsion systems	`N/A`	not current
AURR314166B	Diagnose and repair jet drive propulsion systems	`N/A`	not current
AURR346108B	Carry out hull repairs	`N/A`	not current
AURR346131B	Install marine engines, controls and instruments	`N/A`	not current
AURR346267A	Diagnose and repair marine steering systems	`N/A`	not current
AURR346336A	Launch and recover a vessel using a trailer	`N/A`	not current
AURR346435B	Launch and recover vessel from crane, gantry and forklift	`N/A`	not current
AURR346543A	Moor a motor driven vessel	`N/A`	not current
AURR346650A	Winterise vessel and engine systems	`N/A`	not current
AURR346660B	Recommission vessel systems	`N/A`	not current
AURR346760B	Recommission marine engine systems	`N/A`	not current
AURR346866B	Repair deck, hull and cabin equipment	`N/A`	not current
AURR346931A	Water test a vessel	`N/A`	not current
AURR346975B	Water test engines in tanks	`N/A`	not current
AURR371181A	Implement and monitor environmental regulations in the marine repair industry	`N/A`	not current
AURR401103A	Overhaul two and four cycle outboard engines	`N/A`	not current
AURT200108A	Carry out servicing operations	`N/A`	not current
AURT200368A	Select and use bearings, seals, gaskets, sealants and adhesives	`N/A`	not current
AURT201164A	Remove and install engine assemblies	`N/A`	not current
AURT201170A	Inspect and service engines	`N/A`	not current
AURT202166B	Repair cooling systems	`N/A`	not current
AURT202170B	Inspect and service cooling systems	`N/A`	not current
AURT203170B	Service petrol fuel systems	`N/A`	not current
AURT203670B	Service diesel fuel injection systems	`N/A`	not current
AURT205123A	Fabricate exhaust system/components	`N/A`	not current
AURT205166A	Repair exhaust system components	`N/A`	not current
AURT210170A	Inspect and service braking systems	`N/A`	not current
AURT215130A	Inspect steering systems	`N/A`	not current
AURT225667A	Use and maintain measuring equipment	`N/A`	not current
AURT270278A	Use and maintain workplace tools and equipment	`N/A`	not current
AURT271781A	Implement and monitor environmental regulations in the automotive mechanical industry	`N/A`	not current
AURT303166B	Repair petrol fuel systems	`N/A`	not current
AURT303666A	Repair diesel fuel systems	`N/A`	not current
AURT304666A	Repair and replace emission control systems	`N/A`	not current
AURT305671A	Inspect and repair engine forced induction systems	`N/A`	not current
AURT306170A	Inspect, service and/or repair clutch assemblies and associated operating system components	`N/A`	not current
AURT309166A	Repair hydraulic systems	`N/A`	not current
AURT310166A	Repair hydraulic braking systems	`N/A`	not current
AURT337119A	Drive and manoeuvre trailer(s)	`N/A`	not current
AURT366108A	Carry out diagnostic procedures	`N/A`	not current
AURT366308A	Carry out advanced diagnostic procedures	`N/A`	not current
AURT403145B	Overhaul petrol fuel system components	`N/A`	not current
AURT403645A	Overhaul diesel fuel injection systems	`N/A`	not current
AURT466208A	Carry out diagnosis of complex system faults	`N/A`	not current
AURT471782A	Plan and manage compliance with environmental regulations in the mechanical repair industry	`N/A`	not current
AURTTE3001	Apply knowledge of engine science	`N/A`	not current
AURTTM3001	Operate and monitor computer numerical control machines	`N/A`	not current
AURTTM3002	Repair bearing tunnels and connecting rods in engines	`N/A`	not current
AURTTM3003	Apply metal to rebuild engine components	`N/A`	not current
AURTTM3004	Assemble engine blocks and sub-assemblies	`N/A`	not current
AURTTM3008	Dismantle and evaluate engine blocks and sub-assemblies	`N/A`	not current
AURTTM3011	Recondition engine cylinder heads	`N/A`	not current
AURV223608A	Carry out oxy acetylene welding, thermal cutting and thermal heating procedures	`N/A`	not current
AURV223808A	Carry out soft soldering techniques	`N/A`	not current
AURV281108A	Carry out manual metal arc welding procedures	`N/A`	not current
AURV281508A	Carry out spot welding procedures	`N/A`	not current
AURV323908A	Carry out thermoplastic welding procedures	`N/A`	not current
BSBCMN311B	Maintain workplace safety	`N/A`	not current
BSBFLM312C	Contribute to team effectiveness	`N/A`	not current
BSBWOR202A	Organise and complete daily work activities	`N/A`	not current
BSBWOR301A	Organise personal work priorities and development	`N/A`	not current
CUVACD303A	Produce technical drawings	`N/A`	not current
HLTFA301B	Apply first aid	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05017D	Weld using gas metal arc welding process	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM05051A	Select welding processes	`N/A`	not current
MEM05052A	Apply safe welding practices	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
TAEDEL301A	Provide work skill instruction	`N/A`	not current
TLID1001A	Shift materials safely using manual handling methods	`N/A`	not current
TLID2004A	Load and unload goods/cargo	`N/A`	not current
TLID2010A	Operate a forklift	`N/A`	not current
TLID2013A	Move materials mechanically using automated equipment	`N/A`	not current
TLID3011A	Conduct specialised forklift operations	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Is AUR30511 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.