AUR30812 Certificate III in Motorcycle Mechanical Technology

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUR30812 ended on 12 April 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 14 April 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUR12 — Automotive Industry Retail, Service and Repair Training Package
Currency period ends
12 April 2016
Latest release
Release 1 · 17 January 2013
Supersedes
AUR30405
Superseded by
AUR30816 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUR30812Superseded — equivalentCertificate III in Motorcycle Mechanical Technology
  2. equivalent
  3. AUR30816Superseded — not equivalentCertificate III in Motorcycle Mechanical Technology
  4. not equivalent
  5. AUR30820CurrentCertificate III in Motorcycle Mechanical Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR30405AUR30812not equivalent16 January 2013

    The register records this supersession but attaches no note on what changed.

  • AUR30812AUR30816equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

Is AUR30812 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR30812 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR30812 is made of

training.gov.au lists 43 units for AUR30812: 24 core and 19 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 24 listed

CodeUnitIn this product
AURAEA3003Monitor environmental and sustainability best practice in the automotive mechanical industrynot current
AURASA2002Apply safe working practices in an automotive workplacenot current
AURETR2012Test and repair basic electrical circuitsnot current
AURETR3023Diagnose and repair electronic spark ignition engine management systemsnot current
AURETR3025Test, charge and replace batteriesnot current
AURETR3029Diagnose and repair charging systemsnot current
AURETR3030Diagnose and repair starting systemsnot current
AURETR3031Diagnose and repair ignition systemsnot current
AURJTB3001Diagnose and repair motorcycle braking systemsnot current
AURJTD3003Diagnose and repair motorcycle suspension systems not current
AURJTD3004Diagnose and repair motorcycle steering systemsnot current
AURJTE3001Diagnose and repair motorcycle enginesnot current
AURJTQ3002Diagnose and repair motorcycle driveline systemsnot current
AURJTX3001Diagnose and repair motorcycle clutch systemsnot current
AURJTX3002Diagnose and repair motorcycle manual transmissionsnot current
AURTTA3018Carry out diagnostic proceduresnot current
AURTTB2001Inspect and service braking systemsnot current
AURTTC3003Diagnose and repair cooling systemsnot current
AURTTE2004Inspect and service enginesnot current
AURTTF2001Service petrol fuel systemsnot current
AURTTF3006Diagnose and repair petrol carburettor systemsnot current
AURTTK2002Use and maintain workplace tools and equipmentnot current
AURTTQ2001Service final drive assembliesnot current
AURTTQ2003Service final drive (driveline)not current

Elective units 19 listed

CodeUnitIn this product
AURACA2001Establish relations with customersnot current
AURAFA2003Communicate effectively in an automotive workplacenot current
AURETR3022Diagnose and repair vehicle dynamic control systemsnot current
AURJTJ2001Remove, inspect and fit motorcycle wheel assembliesnot current
AURJTX3003Diagnose and repair motorcycle automatic transmissionsnot current
AURLTD3004Repair steering systems (light vehicle)not current
AURLTD3005Repair suspension systems (light vehicle)not current
AURLTJ2002Remove, inspect, repair and fit tyres and tubes (light)not current
AURLTQ3001Repair final drive assemblies (light vehicle)not current
AURLTQ3002Repair final drive - driveline (light vehicle)not current
AURLTZ3001Diagnose and repair light vehicle emission control systemsnot current
AURSCA2006Promote products and servicesnot current
AURTTA2005Select and use bearings, seals, gaskets, sealants and adhesivesnot current
AURTTA2009Carry out pre-repair operations (mechanical)not current
AURTTC2001Inspect and service cooling systemsnot current
AURTTZ2002Repair exhaust system componentsnot current
AURVTW2001Carry out manual metal arc welding proceduresnot current
AURVTW2003Carry out gas metal arc welding proceduresnot current
AURVTW2008Carry out oxy acetylene welding, thermal cutting and thermal heating proceduresnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Is AUR30812 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.