Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is AUR31312 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR31312 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR31312 is made of
training.gov.au lists 30 units for AUR31312: 13 core and 17 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 13 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA3003 | Monitor environmental and sustainability best practice in the automotive mechanical industry | !not current |
| AURASA2002 | Apply safe working practices in an automotive workplace | !not current |
| AURMTA3007 | Conduct non-destructive testing | !not current |
| AURTTE3001 | Apply knowledge of engine science | !not current |
| AURTTK2001 | Use and maintain measuring equipment in an automotive workplace | !not current |
| AURTTK2002 | Use and maintain workplace tools and equipment | !not current |
| AURTTM3002 | Repair bearing tunnels and connecting rods in engines | !not current |
| AURTTM3004 | Assemble engine blocks and sub-assemblies | !not current |
| AURTTM3007 | Carry out grinding operations | !not current |
| AURTTM3008 | Dismantle and evaluate engine blocks and sub-assemblies | !not current |
| AURTTM3009 | Fit sleeves and bore and hone engine cylinders | !not current |
| AURTTM3011 | Recondition engine cylinder heads | !not current |
| AURTTW3003 | Carry out machining operations | !not current |
Elective units 17 listed
| Code | Unit | In this product |
|---|---|---|
| AURHTE3002 | Repair engines and associated engine components (heavy vehicle) | !not current |
| AURLTE2001 | Remove and install light vehicle engine assemblies | !not current |
| AURLTE3002 | Repair engines and associated engine components (light vehicle) | !not current |
| AURTTA2005 | Select and use bearings, seals, gaskets, sealants and adhesives | !not current |
| AURTTA2009 | Carry out pre-repair operations (mechanical) | !not current |
| AURTTA3018 | Carry out diagnostic procedures | !not current |
| AURTTF3005 | Inspect and repair engine forced induction systems | !not current |
| AURTTM3001 | Operate and monitor computer numerical control machines | !not current |
| AURTTM3003 | Apply metal to rebuild engine components | !not current |
| AURTTM3005 | Balance rotating and reciprocating engine components | !not current |
| AURTTM3006 | Perform advanced machining and blueprinting of engine components | !not current |
| AURTTM3010 | Heat treat, straighten and reclaim engine components | !not current |
| AURTTW3002 | Set, operate and monitor specialist machines | !not current |
| AURVTW2001 | Carry out manual metal arc welding procedures | !not current |
| AURVTW2003 | Carry out gas metal arc welding procedures | !not current |
| AURVTW2004 | Carry out gas tungsten arc welding procedures | !not current |
| AURVTW2008 | Carry out oxy acetylene welding, thermal cutting and thermal heating procedures | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Is AUR31312 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.