Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for AUR31512 and for its training package AUR12 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is AUR31512 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR31512 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR31512 is made of
training.gov.au lists 36 units for AUR31512: 14 core and 22 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 14 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA3003 | Monitor environmental and sustainability best practice in the automotive mechanical industry | !not current |
| AURASA2002 | Apply safe working practices in an automotive workplace | !not current |
| AURETR2012 | Test and repair basic electrical circuits | !not current |
| AURETR3025 | Test, charge and replace batteries | !not current |
| AURHTE3002 | Repair engines and associated engine components (heavy vehicle) | !not current |
| AURTTA2004 | Carry out servicing operations | !not current |
| AURTTA3018 | Carry out diagnostic procedures | !not current |
| AURTTE2004 | Inspect and service engines | !not current |
| AURTTF3004 | Repair diesel fuel injection systems | !not current |
| AURTTK2001 | Use and maintain measuring equipment in an automotive workplace | !not current |
| AURTTK2002 | Use and maintain workplace tools and equipment | !not current |
| AURTTM3004 | Assemble engine blocks and sub-assemblies | !not current |
| AURTTM3008 | Dismantle and evaluate engine blocks and sub-assemblies | !not current |
| AURTTM3011 | Recondition engine cylinder heads | !not current |
Elective units 22 listed
| Code | Unit | In this product |
|---|---|---|
| AURAFA2003 | Communicate effectively in an automotive workplace | !not current |
| AURAMA2001 | Work effectively with others | !not current |
| AURETR3024 | Diagnose and repair electronic compression ignition engine management systems | !not current |
| AURETR3028 | Diagnose and repair instruments and warning systems | !not current |
| AURETR3029 | Diagnose and repair charging systems | !not current |
| AURETR3030 | Diagnose and repair starting systems | !not current |
| AURETR3032 | Repair electrical systems | !not current |
| AURHTE2001 | Remove and install heavy vehicle engine assemblies | !not current |
| AURHTX3004 | Diagnose and repair heavy vehicle clutch systems | !not current |
| AURHTZ3001 | Diagnose and repair heavy vehicle emission control systems | !not current |
| AURMTE4001 | Test engines using a dynamometer | !not current |
| AURTTA2005 | Select and use bearings, seals, gaskets, sealants and adhesives | !not current |
| AURTTA2009 | Carry out pre-repair operations (mechanical) | !not current |
| AURTTF2002 | Service diesel fuel injection systems | !not current |
| AURTTF3005 | Inspect and repair engine forced induction systems | !not current |
| AURTTL3001 | Service CNG fuel systems | !not current |
| AURTTL3002 | Diagnose and repair CNG fuel systems | !not current |
| AURVTW2001 | Carry out manual metal arc welding procedures | !not current |
| AURVTW2003 | Carry out gas metal arc welding procedures | !not current |
| MEM05006C | Perform brazing and or silver soldering | !not current |
| MEM05007C | Perform manual heating and thermal cutting | !not current |
| MEM18028B | Maintain engine lubrication systems | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is AUR31512 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.