Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- AUR31612Superseded — equivalentCertificate III in Automotive Drivetrain Technology
- =equivalent
- AUR31616Deleted from the registerCertificate III in Automotive Drivetrain Technology
The register does not list a current endpoint for this chain: AUR31616 is the last product it points at, and AUR31616 is not marked current either.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is AUR31612 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR31612 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR31612 is made of
training.gov.au lists 30 units for AUR31612: 11 core and 19 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 11 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA3003 | Monitor environmental and sustainability best practice in the automotive mechanical industry | !not current |
| AURASA2002 | Apply safe working practices in an automotive workplace | !not current |
| AURETR2012 | Test and repair basic electrical circuits | !not current |
| AURETR3025 | Test, charge and replace batteries | !not current |
| AURTTA3018 | Carry out diagnostic procedures | !not current |
| AURTTK2002 | Use and maintain workplace tools and equipment | !not current |
| AURTTQ2001 | Service final drive assemblies | !not current |
| AURTTQ2002 | Remove and refit driveline components | !not current |
| AURTTQ2003 | Service final drive (driveline) | !not current |
| AURTTX2002 | Inspect and service transmissions (manual) | !not current |
| AURTTX2003 | Inspect and service transmissions (automatic) | !not current |
Elective units 19 listed
| Code | Unit | In this product |
|---|---|---|
| AURETR3044 | Service and repair electronic drive management systems | !not current |
| AURHTQ3002 | Repair final drive assemblies (heavy vehicle) | !not current |
| AURHTQ3003 | Repair final drive - driveline (heavy vehicle) | !not current |
| AURHTX3001 | Repair transmissions - manual (heavy vehicle) | !not current |
| AURHTX3003 | Repair transmissions - automatic (heavy vehicle) | !not current |
| AURHTX3004 | Diagnose and repair heavy vehicle clutch systems | !not current |
| AURKTQ3001 | Diagnose and repair mobile plant final drive assemblies | !not current |
| AURKTX3001 | Diagnose and repair powershift transmissions | !not current |
| AURLTQ3001 | Repair final drive assemblies (light vehicle) | !not current |
| AURLTQ3002 | Repair final drive - driveline (light vehicle) | !not current |
| AURLTX3001 | Repair transmissions - manual (light vehicle) | !not current |
| AURLTX3002 | Repair transmissions - automatic (light vehicle) | !not current |
| AURLTX3003 | Diagnose and repair light vehicle clutch systems | !not current |
| AURTTQ4004 | Overhaul final drive assemblies | !not current |
| AURTTX3006 | Repair transmissions (hydrostatic) | !not current |
| AURTTX4007 | Overhaul clutch assemblies | !not current |
| AURTTX4008 | Overhaul transmissions (manual) | !not current |
| AURTTX4009 | Overhaul transmissions (automatic) | !not current |
| AURTTX4011 | Overhaul torque converters | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Is AUR31612 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.