AUR40416 Certificate IV in Automotive Performance Enhancement

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in AUR40416 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for AUR40416, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
AUR — Automotive Retail, Service and Repair Training Package
Currency period ends
11 November 2020
Latest release
Release 2 · 7 December 2018 · 2 releases in all
Supersedes
AUR40412
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from AUR40416. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR40412AUR40416equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUR40416 and for its training package AUR (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is AUR40416 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR40416 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR40416 is made of

training.gov.au lists 39 units for AUR40416: 3 core and 36 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 3 listed

CodeUnitIn this product
AURMTE001Test engines using a dynamometernot current
AURMTF002Analyse and repair performance fuel injection systemscurrent
AURTTA021Diagnose complex system faultsnot current

Elective units 36 listed

CodeUnitIn this product
AURAEA003Monitor environmental and sustainability best practice in an automotive workplacecurrent
AURAFA006Conduct research and present technical reportsnot current
AURAFA007Develop and document specifications and procedurescurrent
AURAMA006Contribute to planning and implementing business improvement in an automotive workplacecurrent
AURETR023Diagnose and repair spark ignition engine management systemsnot current
AURETR033Develop and apply network electronic control system modificationscurrent
AURETR034Develop and apply electrical system modificationscurrent
AURLTB001Overhaul light vehicle braking system componentscurrent
AURLTD005Diagnose and repair light vehicle suspension systemsnot current
AURLTQ001Diagnose and repair light vehicle final drive assembliesnot current
AURLTQ012Diagnose and repair light vehicle drive shaftsnot current
AURLTX001Diagnose and repair light vehicle manual transmissionsnot current
AURMTA003Determine material suitability for competition vehicle componentsnot current
AURMTA007Conduct non-destructive testingcurrent
AURMTA008Apply aerodynamic and vehicle dynamic principles and effects to competition vehiclescurrent
AURMTD001Test suspension dampers using a dynamometercurrent
AURMTD002Prepare competition vehicle suspensioncurrent
AURMTF001Analyse and repair performance carburetted fuel systemscurrent
AURMTJ001Select and prepare motor sport competition vehicle tyres and wheelscurrent
AURMTQ001Analyse and repair faults in performance driveline systemsnot current
AURTNA001Estimate and quote automotive vehicle or machinery modificationscurrent
AURTTA022Develop and apply mechanical system modificationscurrent
AURTTA023Develop and apply hydraulic system modificationsnot current
AURTTD004Inspect and service suspension systemscurrent
AURTTD005Overhaul steering system componentscurrent
AURTTE005Overhaul enginescurrent
AURTTF001Inspect and service petrol fuel systemsnot current
AURTTF006Diagnose and repair petrol carburettor systemsnot current
AURTTF007Overhaul carburettor fuel system componentscurrent
AURTTL015Develop and apply gas fuel system modificationsnot current
Show the remaining 6 elective units
CodeUnitIn this product
AURTTQ004Overhaul final drive assembliescurrent
AURTTX007Overhaul clutch assembliescurrent
AURTTX008Overhaul manual transmissionscurrent
AURTTX009Overhaul automatic transmissionscurrent
BSBWHS401Implement and monitor WHS policies, procedures and programs to meet legislative requirementsnot current
MEM30012AApply mathematical techniques in a manufacturing engineering or related environmentnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Take this with you — one email with how the register lists AUR40416 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUR40416 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.