AUR40612 Certificate IV in Automotive Electrical Technology

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUR40612 ended on 12 April 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 14 April 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUR12 — Automotive Industry Retail, Service and Repair Training Package
Currency period ends
12 April 2016
Latest release
Release 1 · 17 January 2013
Supersedes
nothing — no earlier product listed
Superseded by
AUR40616 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUR40612Superseded — equivalentCertificate IV in Automotive Electrical Technology
  2. equivalent
  3. AUR40616Superseded — equivalentCertificate IV in Automotive Electrical Technology
  4. equivalent
  5. AUR40620Superseded — equivalentCertificate IV in Automotive Electrical Technology
  6. equivalent
  7. AUR40626CurrentCertificate IV in Automotive Electrical Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR40612AUR40616equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUR40612 and for its training package AUR12 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • AUR40612_R1.pdfAUR40612 release 1 · product document · published 21 January 2013
  • AUR40612_R1.docxAUR40612 release 1 · product document · published 26 November 2024

Is AUR40612 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR40612 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR40612 is made of

training.gov.au lists 47 units for AUR40612: 1 core and 46 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 1 listed

CodeUnitIn this product
AURTTA4021Carry out diagnosis of complex system faultsnot current

Elective units 46 listed

CodeUnitIn this product
AURAFA5006Prepare technical reportsnot current
AURAFA5007Develop and document specifications and proceduresnot current
AURAKA3002Adapt work processes to new technologiesnot current
AURANN4001Prepare a vehicle repair quotationnot current
AURAQA3002Inspect technical quality of worknot current
AURAQA3003Maintain quality systemsnot current
AURATA3004Provide technical guidancenot current
AURATA3005Estimate complex jobsnot current
AURETB3001Repair electric braking systemsnot current
AURETH3001Depower battery electric vehiclesnot current
AURETH3002Service and maintain battery electric vehiclesnot current
AURETH4003Test and repair high voltage battery systems in battery electric vehiclesnot current
AURETH4004Diagnose and repair traction motor speed control device in battery electric vehiclesnot current
AURETH4005Diagnose and repair high voltage traction motors in battery electric vehiclesnot current
AURETH4006Diagnose and repair auxiliary motors and associated components in battery electric vehiclesnot current
AURETH4007Diagnose and repair system instrumentation and safety interlocks in battery electric vehiclesnot current
AURETH4008Diagnose and repair high voltage cabin heating and cooling systems in battery electric vehiclesnot current
AURETH4009Diagnose and repair DC to DC converters in battery electric vehiclesnot current
AURETH4010Test high voltage batteries in hybrid electric vehiclesnot current
AURETH4011Deactivate and reinitialise power supply in hybrid electric vehiclesnot current
AURETH4012Service and maintain electrical components in hybrid electric vehiclesnot current
AURETH4014Diagnose complex faults in battery electric and hybrid electric vehicle systemsnot current
AURETR2035Demonstrate knowledge of petrol and diesel engine operationnot current
AURETR3025Test, charge and replace batteriesnot current
AURETR4004Diagnose complex electrical and electronic faults in vehicle convenience and entertainment systemsnot current
AURETR4037Diagnose complex electrical and electronic faults in light vehicle safety systemsnot current
AURETR4038Diagnose complex faults in motorcycle electrical and electronic systemsnot current
AURETR4039Diagnose complex electrical and electronic faults in light vehicle theft deterrent systemsnot current
AURETR4040Diagnose complex electrical and electronic faults in vehicle monitoring and protection systemsnot current
AURETR5033Develop and apply electronic systems modificationnot current
Show the remaining 16 elective units
CodeUnitIn this product
AURETR5034Develop and apply electrical systems modificationnot current
AURETU3004Diagnose and repair air conditioning and HVAC systemsnot current
AURETU3005Retrofit and modify air conditioning and HVAC systemsnot current
AURETU4006Diagnose complex faults in air conditioning and HVAC systemsnot current
AURETU4007Overhaul air conditioning system componentsnot current
AURTEA4001Manage environmental compliance in the mechanical repair industrynot current
AURTNA5001Estimate and calculate costs to repair, maintain or modify a vehiclenot current
AURTTA3017Carry out vehicle safety and roadworthy inspectionsnot current
AURTTA4026Diagnose complex faults in vehicle electric-over-hydraulic systemsnot current
AURTTL3010Install LPG, CNG and LNG electrical control equipmentnot current
BSBINN301APromote innovation in a team environmentnot current
BSBLED401ADevelop teams and individualsnot current
BSBWHS401AImplement and monitor WHS policies, procedures and programs to meet legislative requirementsnot current
BSBWOR301BOrganise personal work priorities and developmentnot current
TAEDEL301AProvide work skill instructionnot current
TAEDEL404AMentor in the workplacenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUR40612 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.