Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
CPC30413CPC30420=equivalent26 November 2020
The register records this supersession but attaches no note on what changed.
CPC30420CPC30426=equivalent3 February 2026
Updated reference to CPCWHS1001 in qualification description. Updated superseded units of competency: CPCCDE3028 CPCCDE3029 CPCCDE3030 Updated imported units of competency: TLID0020 TLID0021
Is CPC30420 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC30420 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC30420 is made of
training.gov.au lists 37 units for CPC30420: 11 core and 26 elective. To complete it, the register publishes a rule of 11 core units plus 9 electives — 20 units in all.
Core units 11 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCDE3016 | Identify hazards on demolition sites and apply risk management strategies | !not current |
| CPCCDE3017 | Select and use hand tools and equipment for demolition tasks | ●current |
| CPCCDE3018 | Select and use small plant and equipment for demolition tasks | ●current |
| CPCCDE3019 | Demolish small buildings and structures using hand tools and small plant and equipment | ●current |
| CPCCDE3020 | Select and use tools and equipment for hot work in the demolition industry | ●current |
| CPCCDE3027 | Read and interpret demolition site plans and drawings | ●current |
| CPCCOM1015 | Carry out measurements and calculations | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| TLID1001 | Shift materials safely using manual handling methods | !not current |
| TLID2003 | Handle dangerous goods/hazardous substances | !not current |
Elective units 26 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM3001 | Operate elevated work platforms up to 11 metres | ●current |
| CPCCDE3014 | Remove non-friable asbestos | !not current |
| CPCCDE3015 | Remove friable asbestos | !not current |
| CPCCDE3021 | Operate demolition material crushing plants | ●current |
| CPCCDE3022 | Manage demolition recyclable waste materials and contaminated soil using load shifting equipment | ●current |
| CPCCDE3023 | Operate skid steer loaders at ground level on demolition sites | ●current |
| CPCCDE3024 | Operate mobile plant on suspended floors on demolition sites | ●current |
| CPCCDE3025 | Operate remote-controlled plant on demolition sites | ●current |
| CPCCDE3026 | Operate excavators at ground level to demolish building elements | ●current |
| CPCCLDG3001 | Licence to perform dogging | ●current |
| CPCCLHS3001 | Licence to operate a personnel and materials hoist | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| CPCCLRG3002 | Licence to perform rigging intermediate level | ●current |
| CPCCLSF2001 | Licence to erect, alter and dismantle scaffolding basic level | ●current |
| CPCCLSF3001 | Licence to erect, alter and dismantle scaffolding intermediate level | ●current |
| CPCCLSF4001 | Licence to erect, alter and dismantle scaffolding advanced level | ●current |
| CPCCSF2003 | Cut and bend materials using oxy-LPG equipment | ●current |
| RIIHAN309F | Conduct telescopic materials handler operations | ●current |
| RIIMPO320F | Conduct civil construction excavator operations | ●current |
| RIIRIS202E | Respond to site based spills | ●current |
| RIIRTM203E | Work as a safety observer/spotter | ●current |
| RIIWHS202E | Enter and work in confined spaces | ●current |
| RIIWHS205E | Control traffic with stop-slow bat | ●current |
| RIIWHS302E | Implement traffic management plans | ●current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0005 | Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Is CPC30420 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.