When must new enrolments into CPC32811 stop?

New enrolments are not permitted from 7 February 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CPC32811?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC32811 Certificate III in Fire Protection

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC32811Superseded — not equivalentCertificate III in Fire Protection
not equivalent
CPC32812Superseded — not equivalentCertificate III in Fire Protection
not equivalent
CPC32813Superseded — equivalentCertificate III in Fire Protection
equivalent
CPC32820CurrentCertificate III in Fire Protection

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC32808CPC32811not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC32811CPC32812not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC32811 Change to core units: • CPCPCM2011A replaced with imported unit HLTFA211A • CPCPCM2023A revised and not equivalent to CPCPCM2043A Change to elective units: • CPPCMN2002A Participate in workplace safety arrangements and CPPFES2006A Prepare for installation and servicing operations added to elective unit list to correct their omission from the packaging rules, given their status as prerequisite to CPCPFS3040A, CPCPFS3041A, CPCPFS3042A and CPCPFS3043A Core and elective units revised resulting in a number of unit identifier changes

Is CPC32811 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC32811 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC32811 is made of

training.gov.au lists 48 units for CPC32811. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 48 listed

Code	Unit	Core or elective	In this product
CPCCCM2008A	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010A	Work safely at heights	`N/A`	not current
CPCCCM3001B	Operate elevated work platforms	`N/A`	not current
CPCCPB3015A	Install acoustic and thermal environmental protection systems	`N/A`	not current
CPCCRI3001A	Operate personnel and materials hoists	`N/A`	not current
CPCCST2005A	Carry out load slinging of off-site materials	`N/A`	not current
CPCPCM2002A	Carry out interactive workplace communication	`N/A`	not current
CPCPCM2004A	Read plans and calculate plumbing quantities	`N/A`	not current
CPCPCM2011A	Apply first aid in the workplace	`N/A`	not current
CPCPCM2021A	Work effectively in the plumbing and services sector	`N/A`	not current
CPCPCM2023A	Carry out OHS requirements	`N/A`	not current
CPCPCM2025A	Handle and store plumbing materials	`N/A`	not current
CPCPCM2026A	Use plumbing hand and power tools	`N/A`	not current
CPCPCM2027A	Carry out levelling	`N/A`	not current
CPCPCM2028A	Cut and join sheet metal	`N/A`	not current
CPCPCM2029A	Cut using oxy-LPG-acetylene equipment	`N/A`	not current
CPCPCM2030A	Mark out materials	`N/A`	not current
CPCPCM2032A	Weld using oxy-acetylene equipment	`N/A`	not current
CPCPCM2033A	Weld using arc welding equipment	`N/A`	not current
CPCPCM2034A	Carry out simple concreting and rendering	`N/A`	not current
CPCPCM2035A	Work safely on roofs	`N/A`	not current
CPCPCM3011A	Flash penetrations through roofs and walls	`N/A`	not current
CPCPCM3012A	Weld plastic pipe using fusion method	`N/A`	not current
CPCPCM3013A	Fabricate and install non-ferrous pressure piping	`N/A`	not current
CPCPFS2011A	Connect static storage tanks for fixed fire protection systems	`N/A`	not current
CPCPFS2012A	Install portable fire equipment	`N/A`	not current
CPCPFS3010A	Design pre-calculated fire sprinkler systems	`N/A`	not current
CPCPFS3011A	Fabricate and install fire hydrant and hose reel systems	`N/A`	not current
CPCPFS3012A	Install distribution and range pipes	`N/A`	not current
CPCPFS3013A	Fit off sprinkler heads, controls and ancillary equipment	`N/A`	not current

Show the remaining 18 units

Code	Unit	Core or elective	In this product
CPCPFS3014A	Install control valve assemblies, actuating devices and local alarms	`N/A`	not current
CPCPFS3015A	Test fire protection systems for pressure	`N/A`	not current
CPCPFS3016A	Install special hazard systems	`N/A`	not current
CPCPFS3017A	Install domestic and residential life safety sprinkler systems	`N/A`	not current
CPCPFS3018A	Test and maintain fire hydrant and hose reel installations	`N/A`	not current
CPCPFS3019A	Test and maintain automatic fire sprinklers	`N/A`	not current
CPCPFS3020A	Conduct basic functional testing of water-based fire-suppression systems	`N/A`	not current
CPCPFS3021A	Inspect and test fire pumpsets	`N/A`	not current
CPCPFS3022A	Conduct annual functional testing of complex water-based fire-suppression systems	`N/A`	not current
CPCPFS3023A	Conduct functional water flow testing	`N/A`	not current
CPCPMS3011A	Fabricate and install steel pressure piping	`N/A`	not current
CPCPWT3015A	Install water pump sets	`N/A`	not current
CPCPWT3018A	Install water service	`N/A`	not current
CPCPWT3019A	Install water pipe systems	`N/A`	not current
PRMPFES25C	Inspect, test and maintain gaseous fire suppression systems	`N/A`	not current
PRMPFES43A	Prevent ozone depleting substance and synthetic greenhouse gas emissions	`N/A`	not current
PRMPFES47A	Inspect and test control and indicating equipment	`N/A`	not current
RIICCM210A	Install trench support	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPC32811 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.