Where the register points next
training.gov.au points at nothing after CPC40920: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for CPC40920 and for its training package CPC (release 11.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is CPC40920 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC40920 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC40920 is made of
training.gov.au lists 34 units for CPC40920: 10 core and 24 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 10 listed
| Code | Unit | In this product |
|---|---|---|
| BSBESB402 | Establish legal and risk management requirements of new business ventures | ●current |
| CPCCBC4012 | Read and interpret plans and specifications | ●current |
| CPCPCM4011 | Carry out work-based risk control processes | ●current |
| CPCPCM4012 | Estimate and cost work | ●current |
| CPCPCM4015 | Access and interpret regulatory requirements for the plumbing and services industry | ●current |
| CPCPDR4011 | Design and size sanitary drainage systems | ●current |
| CPCPDR4012 | Design and size stormwater drainage systems | ●current |
| CPCPGS4011 | Design and size consumer gas installations | ●current |
| CPCPSN4011 | Design and size sanitary plumbing systems | ●current |
| CPCPWT4011 | Design and size heated and cold-water services and systems | ●current |
Elective units 24 listed
| Code | Unit | In this product |
|---|---|---|
| BSBESB403 | Plan finances for new business ventures | ●current |
| CPCCBC4002 | Manage work health and safety in the building and construction workplace | ●current |
| CPCCBC4019 | Apply sustainable building design principles to water management systems | ●current |
| CPCCBC4024 | Resolve business disputes | ●current |
| CPCPCM2043 | Carry out WHS requirements | ●current |
| CPCPCM4013 | Produce 2-D architectural drawings using design software | ●current |
| CPCPDR3023 | Install on-site domestic wastewater treatment plants and disposal systems | ●current |
| CPCPDR4013 | Design and size domestic treatment plant disposal systems | ●current |
| CPCPFS3037 | Install residential life safety sprinkler systems | ●current |
| CPCPFS4021 | Commission domestic and residential fire suppression sprinkler systems | ●current |
| CPCPFS4024 | Design residential fire sprinkler systems | ●current |
| CPCPGS3053 | Disconnect and reconnect Type A gas appliances | ●current |
| CPCPGS4022 | Service Type A gas appliances | ●current |
| CPCPGS4023 | Install, commission and service Type B gas appliances | ●current |
| CPCPMS4011 | Design, size and lay out heating and cooling systems | ●current |
| CPCPMS4022 | Commission air and water systems | ●current |
| CPCPMS4023 | Design compressed air systems | ●current |
| CPCPPS5033 | Design vacuum drainage systems | ●current |
| CPCPRF4011 | Design and size roof drainage systems | ●current |
| CPCPWT3022 | Install and commission water heating systems and adjust controls and devices | ●current |
| CPCPWT3027 | Install backflow prevention devices | ●current |
| CPCPWT4022 | Commission and maintain backflow prevention devices | ●current |
| CPCPWT4023 | Commission and maintain hot and heated water temperature control devices | ●current |
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Take this with you — one email confirming CPC40920 is current on the register today, and what starts the clock if it is ever superseded. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and, if you tick the watch below, an email when something on it approaches the date new enrolments stop or changes what you have to do.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.