Can an RTO still enrol new students in CPP20511?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 20 January 2022. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPP20511?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPP20511 Certificate II in Fire Protection Inspection and Testing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPP20511Superseded — equivalentCertificate II in Fire Protection Inspection and Testing
equivalent
CPP20521CurrentCertificate II in Fire Protection Inspection and Testing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PRM20406CPP20511equivalent9 January 2012
The register records this supersession but attaches no note on what changed.
CPP20511CPP20521equivalent19 January 2021
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPP20511 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPP20511_R1.docxCPP20511 release 1 · product document · published 26 November 2024
CPP20511_R1.pdfCPP20511 release 1 · product document · published 20 July 2012

Is CPP20511 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP20511 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP20511 is made of

training.gov.au lists 28 units for CPP20511. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 28 listed

Code	Unit	Core or elective	In this product
BSBWOR202A	Organise and complete daily work activities	`N/A`	not current
CPCPFS3020A	Conduct basic functional testing of water-based fire-suppression systems	`N/A`	not current
CPCPFS3021A	Inspect and test fire pumpsets	`N/A`	not current
CPPCMN2002A	Participate in workplace safety arrangements	`N/A`	not current
CPPCMN2003A	Provide effective client service	`N/A`	not current
CPPFES2003A	Safely move loads and dangerous goods	`N/A`	not current
CPPFES2004A	Identify types of installed fire safety equipment and systems	`N/A`	not current
CPPFES2005A	Demonstrate first attack firefighting equipment	`N/A`	not current
CPPFES2006A	Prepare for installation and servicing operations	`N/A`	not current
CPPFES2007A	Maintain quality of work and promote continuous improvement	`N/A`	not current
CPPFES2010A	Inspect and test fire hose reels	`N/A`	not current
CPPFES2011A	Install portable fire extinguishers and fire blankets	`N/A`	not current
CPPFES2016A	Inspect, test and maintain delivery lay flat fire hoses	`N/A`	not current
CPPFES2020A	Conduct routine inspection and testing of fire extinguishers and fire blankets	`N/A`	not current
CPPFES2021A	Inspect, test and maintain fire extinguishers	`N/A`	not current
CPPFES2025A	Inspect, test and maintain gaseous fire-suppression systems	`N/A`	not current
CPPFES2026A	Inspect and test emergency and exit lighting systems	`N/A`	not current
CPPFES2027A	Inspect, test and maintain non-gaseous pre-engineered fire-suppression systems	`N/A`	not current
CPPFES2029A	Conduct functional tests on fire detection, warning and intercommunication devices	`N/A`	not current
CPPFES2035A	Identify, inspect and test fire and smoke doors	`N/A`	not current
CPPFES2037A	Inspect and test fire hydrant systems	`N/A`	not current
CPPFES2039A	Identify, inspect and test passive fire and smoke containment products and systems	`N/A`	not current
CPPFES2043A	Prevent ozone depleting substance and synthetic greenhouse gas emissions	`N/A`	not current
CPPFES2047A	Inspect and test control and indicating equipment	`N/A`	not current
CPPFES2048A	Receive and dispatch scheduled gaseous fire-extinguishing agents	`N/A`	not current
CPPFES2049A	Conduct recovery, reclaim and fill operations for scheduled gaseous fire-extinguishing agents	`N/A`	not current
CPPFES2050A	Monitor storage operations for scheduled gaseous fire-extinguishing agents	`N/A`	not current
HLTFA301C	Apply first aid	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP20511 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.