CPP30507 Certificate III in Technical Security

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for CPP30507 ended on 28 September 2019 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 30 September 2020. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding CPP30519 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
CPP07 — Property Services Training Package
Currency period ends
28 September 2019
Latest release
Release 3 · 21 October 2021 · 3 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
CPP30519 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPP30507Superseded — not equivalentCertificate III in Technical Security
  2. not equivalent
  3. CPP30519CurrentCertificate III in Technical Security

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPP30507CPP30519not equivalent29 September 2019

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPP30507 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPP30507_R3.pdfCPP30507 release 3 · product document · published 21 October 2021
  • CPP30507_R3.docxCPP30507 release 3 · product document · published 26 November 2024

Is CPP30507 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP30507 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP30507 is made of

training.gov.au lists 20 units for CPP30507: 1 core and 1 elective, and 18 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 1 listed

CodeUnitIn this product
CPPSEC3001AMaintain workplace safety in the security industrynot current

Elective units 1 listed

CodeUnitIn this product
BSBFLM306Provide workplace information and resourcing plansnot current

Units the register marks neither core nor elective 18 listed

CodeUnitCore or electiveIn this product
CPPSEC3005APrepare and present security documentation and reportsN/Anot current
CPPSEC3006ACoordinate a quality security service to clientsN/Anot current
CPPSEC3024AInstall biometric equipment and systemsN/Anot current
CPPSEC3025AIdentify and diagnose biometric system faultN/Anot current
CPPSEC3035AIdentify technical security requirementsN/Anot current
CPPSEC3036AProgram security equipment and systemN/Anot current
CPPSEC3037ATest installed security equipment and systemN/Anot current
CPPSEC3038ACommission and decommission security equipment and systemN/Anot current
CPPSEC3039AIdentify and diagnose electronic security equipment and system faultN/Anot current
CPPSEC3040APlan and coordinate installation of security equipment and systemN/Anot current
CPPSEC3041AMaintain and service security equipment and systemN/Anot current
CPPSEC3042AIdentify and diagnose CCTV equipment and system faultN/Anot current
CPPSEC3043AEstablish and set up electronic monitoring parametersN/Anot current
CPPSEC3044AMaintain and repair mechanical lock and locking systemN/Anot current
CPPSEC3045ADetermine security equipment and system modificationsN/Anot current
CPPSEC3046AConfigure a security systemN/Anot current
CPPSEC3047AProvide estimate and quote on security systemN/Anot current
ICTCBL2137AInstall, maintain and modify customer premises communications cabling: ACMA Open RuleN/Anot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP30507 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.