Can an RTO still enrol new students in CPP50107?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPP50107?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPP50107 Diploma of Surveying — superseded, not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPP50107Superseded — not equivalentDiploma of Surveying
not equivalent
CPP50112Superseded — equivalentDiploma of Surveying
equivalent
CPP50116Superseded — equivalentDiploma of Surveying
equivalent
CPP50121CurrentDiploma of Surveying

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPP50107CPP50112not equivalent26 November 2012
Changed outcome for all native CPP07 core units. Native and imported elective units updated.

Official documents on the register

What training.gov.au lists for CPP50107 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPP50107_R1.pdfCPP50107 release 1 · product document · published 20 July 2012
CPP50107_R1.docxCPP50107 release 1 · product document · published 26 November 2024

Is CPP50107 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP50107 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP50107 is made of

training.gov.au lists 38 units for CPP50107. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 38 listed

Code	Unit	Core or elective	In this product
BSBATSIL502B	Work with the manager	`N/A`	not current
BSBITU402A	Develop and use complex spreadsheets	`N/A`	not current
BSBOHS509A	Ensure a safe workplace	`N/A`	not current
CPCCSV5007A	Undertake site surveys and set-out procedures for building projects	`N/A`	not current
CPCCSV5008A	Apply building control legislation to building surveying	`N/A`	not current
CPPCMN4002A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
CPPSIS5001A	Plan spatial data collection and validation	`N/A`	not current
CPPSIS5003A	Implement a spatial information services project plan	`N/A`	not current
CPPSIS5007A	Maintain complex spatial data systems	`N/A`	not current
CPPSIS5010A	Collate and interpret spatial data	`N/A`	not current
CPPSIS5013A	Design a spatial data storage system	`N/A`	not current
CPPSIS5014A	Develop a subdivision survey design for local government approval	`N/A`	not current
CPPSIS5015A	Undertake spatial process improvement to reduce costs and improve service	`N/A`	not current
CPPSIS5016A	Design a stormwater system	`N/A`	not current
CPPSIS5017A	Conduct an advanced GPS data collection and set out survey	`N/A`	not current
CPPSIS5018A	Conduct an engineering survey	`N/A`	not current
CPPSIS5019A	Conduct an engineering surveying project	`N/A`	not current
CPPSIS5020A	Create engineering drawings	`N/A`	not current
CPPSIS5021A	Apply land and planning law to surveying	`N/A`	not current
CPPSIS5022A	Integrate surveying datasets	`N/A`	not current
CPPSIS5023A	Manage advanced surveying computations	`N/A`	not current
CPPSIS5024A	Perform geodetic surveying computations	`N/A`	not current
CPPSIS5025A	Plan and conduct major survey expeditions	`N/A`	not current
CPPSIS5026A	Design road and railway	`N/A`	not current
CPPSIS5027A	Carry out a precision survey	`N/A`	not current
CPPSIS5028A	Conduct geodetic surveying	`N/A`	not current
CPPSIS5029A	Determine suitable information sources to create new spatial datasets	`N/A`	not current
CPPSIS6001A	Conduct open mine pit surveying	`N/A`	not current
CPPSIS6002A	Create mine drawings	`N/A`	not current
CPPSIS6013A	Conduct underground mine surveying	`N/A`	not current

Show the remaining 8 units

Code	Unit	Core or elective	In this product
FDFOPTRWP3A	Report on workplace performance	`N/A`	not current
ICTTC032C	Undertake a civil site survey	`N/A`	not current
LGAPLEM404A	Prepare and present geographic information systems data	`N/A`	not current
LGAPLEM508A	Manipulate and analyse data within geographic information systems	`N/A`	not current
MNCO1046A	Apply and monitor systems and methods of mining	`N/A`	not current
MNQGEN500A	Implement and maintain management plans to control risk	`N/A`	not current
PSPLAND308A	Compile and check survey plans	`N/A`	not current
RTD4507A	Produce maps for land management purposes	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP50107 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.