FNS50810 Diploma of Financial Risk Management

Supersededtraining.gov.au: supersededEquivalent

The currency period for FNS50810 ended on 14 January 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 16 January 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
FNS10 — Financial Services Training Package
Currency period ends
14 January 2012
Latest release
Release 1 · 24 November 2010
Supersedes
FNS51104
Superseded by
FNS50811 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. FNS50810Superseded — equivalentDiploma of Financial Risk Management
  2. equivalent
  3. FNS50811Superseded — not equivalentDiploma of Integrated Risk Management
  4. not equivalent
  5. FNS50815Deleted from the registerDiploma of Integrated Risk Management

The register does not list a current endpoint for this chain: FNS50815 is the last product it points at, and FNS50815 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FNS51104FNS50810not equivalent23 November 2010

    The register records this supersession but attaches no note on what changed.

  • FNS50810FNS50811equivalent15 January 2012

    Title change to more accurately reflect the focus of the qualification. Core unit FNSORG508A has been swapped with BSBRSK501A from elective as a more suitable core unit; elective pool has been rationalised - OUTCOMES EQUIVALENT

Is FNS50810 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FNS50810 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FNS50810 is made of

training.gov.au lists 79 units for FNS50810. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 79 listed

CodeUnitCore or electiveIn this product
BSBCOM401BOrganise and monitor the operation of compliance management systemN/Anot current
BSBCOM402BImplement processes for the management of a breach in compliance requirementsN/Anot current
BSBCOM501BIdentify and interpret compliance requirementsN/Anot current
BSBCOM503BDevelop processes for the management of breaches in compliance requirementsN/Anot current
BSBCOM602BDevelop and create compliance requirementsN/Anot current
BSBCOM603BPlan and establish compliance management systemsN/Anot current
BSBINM401AIMPLEMENT WORKPLACE INFORMATION SYSTEMN/Anot current
BSBINM501AManage an information or knowledge management systemN/Anot current
BSBINM601AManage knowledge and informationN/Anot current
BSBINN502ABuild and sustain an innovative work environmentN/Anot current
BSBMGT515AManage operational planN/Anot current
BSBMGT605BProvide leadership across the organisationN/Anot current
BSBMGT615AContribute to organisation developmentN/Anot current
BSBMGT616ADevelop and implement strategic plansN/Anot current
BSBMGT617ADevelop and implement a business planN/Anot current
BSBOHS303BContribute to OHS hazard identification and risk assessmentN/Anot current
BSBOHS403BIdentify hazards and assess OHS risksN/Anot current
BSBOHS404BContribute to the implementation of strategies to control OHS riskN/Anot current
BSBOHS502BParticipate in the management of the OHS information and data systemsN/Anot current
BSBOHS504BApply principles of OHS risk managementN/Anot current
BSBOHS506BMonitor and facilitate the management of hazards associated with plantN/Anot current
BSBOHS507BFacilitate the application of principles of occupational health to control OHS riskN/Anot current
BSBOHS601BDevelop a systematic approach to managing OHSN/Anot current
BSBOHS602BDevelop OHS information and data analysis and reporting and recording processesN/Anot current
BSBOHS603BAnalyse and evaluate OHS riskN/Anot current
BSBOHS604BApply ergonomic principles to control OHS riskN/Anot current
BSBOHS605BApply occupational hygiene principles to control OHS riskN/Anot current
BSBOHS606BDevelop and implement crisis management processesN/Anot current
BSBOHS607BAdvise on application of safe design principles to control OHS riskN/Anot current
BSBOHS608BConduct an OHS auditN/Anot current
Show the remaining 49 units
CodeUnitCore or electiveIn this product
BSBOHS609BEvaluate an organisation's OHS performanceN/Anot current
BSBPMG404AApply quality management techniquesN/Anot current
BSBPMG407AApply risk management techniquesN/Anot current
BSBPMG501AManage application of project integrative processesN/Anot current
BSBPMG508AManage project riskN/Anot current
BSBPMG510AManage projectsN/Anot current
BSBPMG605ADirect quality management of a project programN/Anot current
BSBPMG607ADirect communications management of a project programN/Anot current
BSBPMG608ADirect risk management of a project programN/Anot current
BSBREL701ADevelop and cultivate collaborative partnerships and relationshipsN/Anot current
BSBRSK401AIdentify risk and apply risk management processesN/Anot current
BSBRSK501AManage riskN/Anot current
BSBSMB401AEstablish legal and risk management requirements of small businessN/Anot current
BSBSUS501ADevelop workplace policy and procedures for sustainabilityN/Anot current
BSBWOR401AEstablish effective workplace relationshipsN/Anot current
FNSACC505AEstablish and maintain accounting information systemsN/Anot current
FNSACC506AImplement and maintain internal control proceduresN/Anot current
FNSACC604AMonitor corporate governance activitiesN/Anot current
FNSACC606AConduct internal auditN/Anot current
FNSACC609AEvaluate financial riskN/Anot current
FNSFMK503AAdvise clients on financial riskN/Anot current
FNSFMK505AComply with financial services legislation and industry codes of practiceN/Anot current
FNSIBK509AIdentify and advise on significant risk changes to broking client insurancesN/Anot current
FNSIBK510AAssess and negotiate complex risk portfolio for broking client at renewalN/Anot current
FNSILF401AContribute to the life risk underwriting processN/Anot current
FNSILF501AAssess extraordinary risksN/Anot current
FNSINC401AApply principles of professional practice to work in the financial services industryN/Anot current
FNSISV401AEvaluate risk for new businessN/Anot current
FNSISV402AUnderwrite new businessN/Anot current
FNSISV403ASurvey potential risk exposureN/Anot current
FNSISV404AUnderwrite renewal businessN/Anot current
FNSISV503AUndertake post-loss risk managementN/Anot current
FNSISV505ADetermine risk rating for investment and insurance productsN/Anot current
FNSISV506AInvestigate claimsN/Anot current
FNSORG501ADevelop and manage a budgetN/Anot current
FNSORG502ADevelop and monitor policy and proceduresN/Anot current
FNSORG503ADevelop a resource planN/Anot current
FNSORG505APrepare financial reports to meet statutory requirementsN/Anot current
FNSORG506APrepare financial forecasts and projectionsN/Anot current
FNSORG507AManage client service and business informationN/Anot current
FNSORG508AAnalyse and comment on management reportsN/Anot current
FNSORG601ANegotiate to achieve goals and manage disputesN/Anot current
FNSORG602ADevelop and manage financial systemsN/Anot current
FNSORG603AEstablish and prepare operational guidelines in a financial services organisationN/Anot current
FNSPRM601AEstablish, supervise and monitor practice systems to conform with legislation and regulationsN/Anot current
FNSRSK501AUndertake risk identificationN/Anot current
FNSRSK502AAssess risksN/Anot current
FNSRSK601ADevelop and implement risk mitigation planN/Anot current
FNSRSK602ADetermine and manage risk exposure strategiesN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FNS training product on the register · Search all training products

Is FNS50810 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.