Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is FPI30311 on your scope?
This page is the register's record of one product. What it cannot tell you is whether FPI30311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What FPI30311 is made of
training.gov.au lists 93 units for FPI30311: 6 core and 87 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 6 listed
| Code | Unit | In this product |
|---|---|---|
| BSBFLM312C | Contribute to team effectiveness | !not current |
| FPICOR2201B | Work effectively in the forest and forest products industry | !not current |
| FPICOR2202B | Communicate and interact effectively in the workplace | !not current |
| FPICOR3201B | Implement safety, health and environment policies and procedures | !not current |
| FPICOR3202B | Conduct quality and product care procedures | !not current |
| FPICOR3204B | Visually assess materials | !not current |
Elective units 87 listed
| Code | Unit | In this product |
|---|---|---|
| AHCCHM303A | Prepare and apply chemicals | !not current |
| BSBFLM303C | Contribute to effective workplace relationships | !not current |
| BSBFLM305C | Support operational plan | !not current |
| BSBINM301A | Organise workplace information | !not current |
| BSBITU306A | Design and produce business documents | !not current |
| FPICOR3203B | Evaluate fire potential and prevention | !not current |
| FPICOT2240 | Cut material with a pole saw | !not current |
| FPICOT2241 | Apply wood and timber product knowledge | !not current |
| FPICOT3201B | Hand sharpen knives and blades | !not current |
| FPICOT3202B | Navigate in remote or trackless areas | !not current |
| FPICOT3203B | Weigh loads | !not current |
| FPICOT3205B | Dress boards using multi-headed machines | !not current |
| FPICOT3206B | Cut material using high speed optimiser | !not current |
| FPICOT3207B | Set up, operate and maintain finger jointing operations | !not current |
| FPICOT3208B | Test strength of joints | !not current |
| FPICOT3209B | Set up, operate and maintain end matching operations | !not current |
| FPICOT3211B | Maintain sawdoctoring tools | !not current |
| FPICOT3212B | Replace saws, blades and guides | !not current |
| FPICOT3213B | Manufacture cutting tools | !not current |
| FPICOT3215B | Swage and shape saw blades | !not current |
| FPICOT3216B | Assess and maintain saw performance | !not current |
| FPICOT3217B | Assess and maintain cutter performance | !not current |
| FPICOT3224B | Plan and monitor equipment maintenance | !not current |
| FPICOT3225B | Mechanically stress grade timber | !not current |
| FPICOT3227B | Receive and measure logs | !not current |
| FPICOT3229B | Mechanically stress grade panels | !not current |
| FPICOT3230B | Operate automated stacking equipment | !not current |
| FPICOT3231B | Operate steam boiler | !not current |
| FPICOT3232B | Operate heat plant | !not current |
| FPICOT3233B | Sharpen and align blades and knives | !not current |
Show the remaining 57 elective units
| Code | Unit | In this product |
|---|---|---|
| FPICOT3234B | Cut material using CNC sizing machines | !not current |
| FPICOT3235B | Machine material using CNC machining and processing centres | !not current |
| FPICOT3236B | Coordinate stock control procedures | !not current |
| FPICOT3237B | Produce templates | !not current |
| FPICOT3240B | Grade heavy structural/engineered products | !not current |
| FPICOT3245B | Grade, sort and mark material | !not current |
| FPICOT3246B | Test heavy structural/engineered products | !not current |
| FPICOT3248A | Dry timber in solar assisted kilns | !not current |
| FPICOT3249A | Select timber preservation techniques | !not current |
| FPICOT3250A | Prepare timber to meet import/export compliance requirements | !not current |
| FPICOT3253A | Convert timber residue into products for further use | !not current |
| FPICOT3254A | Implement environmentally sustainable work practices in the work area/work site | !not current |
| FPICOT3259 | Operate a four wheel drive on unsealed roads | !not current |
| FPICOT3260 | Recover four wheel drive vehicles | !not current |
| FPICOT3263 | Maintain and contribute to energy efficiency | !not current |
| FPICOT3264 | Build and maintain timber stacks | !not current |
| FPIFGM3214 | Operate a four wheel drive in a towing situation | !not current |
| FPISAW3201B | Treat timber | !not current |
| FPISAW3202B | Produce sawn green boards | !not current |
| FPISAW3203B | Break down logs | !not current |
| FPISAW3204B | Saw flitches and cants | !not current |
| FPISAW3205B | Dry hardwood | !not current |
| FPISAW3206B | Dry softwood | !not current |
| FPISAW3207B | Sharpen band saws | !not current |
| FPISAW3208B | Sharpen circular saws | !not current |
| FPISAW3209B | Align sawing production systems | !not current |
| FPISAW3210B | File and set saws | !not current |
| FPISAW3211B | Recondition guides | !not current |
| FPISAW3212B | Sharpen tipped circular saws | !not current |
| FPISAW3213B | Level and tension circular saws | !not current |
| FPISAW3214B | Join band saw blades | !not current |
| FPISAW3215B | Screen wood chips | !not current |
| FPISAW3216B | Transfer wood chips | !not current |
| FPISAW3217B | Hard face saw teeth | !not current |
| FPISAW3218B | Replace tungsten tips | !not current |
| FPISAW3219B | Replace stellite tips | !not current |
| FPISAW3220C | Maintain wide band saw blades | !not current |
| FPISAW3221B | Profile saw blanks | !not current |
| FPISAW3222B | Recondition band mill wheels | !not current |
| FPISAW3223B | Assess wood chips | !not current |
| FPISAW3224B | Coordinate and monitor the wood chip stockpile | !not current |
| FPISAW3226B | Saw logs using CNC optimising systems | !not current |
| FPISAW3227B | Select and saw logs in multi-species operations | !not current |
| FPISAW3229B | Operate a portable sawmill | !not current |
| HLTAID003 | Provide first aid | !not current |
| HLTAID006 | Provide advanced first aid | !not current |
| MEM18011C | Shut down and isolate machines/equipment | !not current |
| MSS402001A | Apply competitive systems and practices | !not current |
| MSS404060A | Facilitate the use of planning software systems in a work area or team | !not current |
| RIIMPO321B | Conduct civil construction wheeled front end loader operations | !not current |
| RIIMPO323A | Conduct civil construction dozer operations | !not current |
| TLIA3018A | Organise despatch operations | !not current |
| TLID3011A | Conduct specialised forklift operations | !not current |
| TLID3014A | Load and unload vehicles carrying special loads | !not current |
| TLID3035A | Operate a boom type elevating work platform | !not current |
| TLID3043A | Shift loads using gantry equipment | !not current |
| TLIF1002B | Conduct housekeeping activities | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every FPI training product on the register · Search all training products
Is FPI30311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.