FPP30110 Certificate III in Pulping Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for FPP30110 ended on 4 May 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 6 May 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
FPP10 — Pulp & Paper Manufacturing Industry Training Package
Currency period ends
4 May 2016
Latest release
Release 3 · 1 May 2015 · 3 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
PPM30116 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. FPP30110Superseded — equivalentCertificate III in Pulping Operations
  2. equivalent
  3. PPM30116Superseded — not equivalentCertificate III in Pulping Operations
  4. not equivalent
  5. PPM30121CurrentCertificate III in Pulp and Paper Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • FPP30110PPM30116equivalent5 May 2016

    The register records this supersession but attaches no note on what changed.

Is FPP30110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether FPP30110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What FPP30110 is made of

training.gov.au lists 109 units for FPP30110: 1 core and 108 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 1 listed

CodeUnitIn this product
FPPPRS210AIdentify and rectify problems in the workplacenot current

Elective units 108 listed

CodeUnitIn this product
BSBADM405BOrganise meetingsnot current
BSBCMM201ACommunicate in the workplacenot current
BSBFLM305CSupport operational plannot current
BSBFLM309CSupport continuous improvement systems and processesnot current
BSBFLM311CSupport a workplace learning environmentnot current
BSBFLM312CContribute to team effectivenessnot current
BSBOHS403BIdentify hazards and assess OHS risksnot current
BSBRES401AAnalyse and present research informationnot current
BSBRSK401AIdentify risk and apply risk management processesnot current
BSBWHS401AImplement and monitor WHS policies, procedures and programs to meet legislative requirementsnot current
BSBWHS403AContribute to implementing and maintaining WHS consultation and participation processesnot current
BSBWRK402AEmpower workersnot current
BSBWRK403ACommunicate with workersnot current
BSBWRK404APromote equality of opportunity and fair treatment for all workersnot current
BSBWRK406AParticipate in the bargaining processnot current
BSBWRK407AProvide advice to union membersnot current
BSBWRK408AUndertake negotiationsnot current
BSBWRK409APrepare for and participate in dispute resolutionnot current
CPPSEC2011BControl access to and exit from premisesnot current
CPPSEC2015APatrol premisesnot current
CPPSEC3007AMaintain security of environmentnot current
FPPCPR210APrepare chemical productsnot current
FPPCSK310AOperate process control equipmentnot current
FPPENV210AIdentify and monitor environmental discharges/emissionsnot current
FPPENV320AMonitor and control environmental hazardsnot current
FPPEPG210AMonitor and control power generation systemnot current
FPPEPG320AManage a power generation system startupnot current
FPPEPG330ACo-ordinate power generation system shutdownnot current
FPPMHV210AOperate overhead cranenot current
FPPNUM210AEstimate and calculate basic datanot current
Show the remaining 78 elective units
CodeUnitIn this product
FPPNUM320AMeasure and calculate routine workplace datanot current
FPPOHS310AContribute to OHS processesnot current
FPPOHS320AMaintain OHS processesnot current
FPPPRM210AUndertake operator level preventative maintenancenot current
FPPPRM220APerform lubricationnot current
FPPPRS320ASolve systemic problems in the workplacenot current
FPPPRV210AOperate ancillary equipmentnot current
FPPPRV320ACo-ordinate and direct clothing changesnot current
FPPPUL210AMonitor and control pulping operationsnot current
FPPPUL320APrepare and start up pulping system operationsnot current
FPPPUL330ACo-ordinate and implement pulping plant shutdownsnot current
FPPQAS210AApply basic quality practicesnot current
FPPREC210AMonitor and control chemical recovery operationsnot current
FPPREC320APrepare and start up chemical recovery operationsnot current
FPPREC330ACo-ordinate and implement chemical recovery shutdownsnot current
FPPREL210AContribute to effective working relationshipsnot current
FPPRES210APrepare and operate the woodchip production systemnot current
FPPRES340ATroubleshoot and rectify primary resource operationsnot current
FPPSPR210AMonitor and control stock preparation systemsnot current
FPPSPR320APrepare and start up stock preparation system for productionnot current
FPPSPR330ACo-ordinate and implement stock preparation system shutdownnot current
FPPSTM210AMonitor and control boiler operationnot current
FPPSTM320AManage steam boiler startupnot current
FPPSTM330AShut down and bank steam boilernot current
FPPSUS210AApply sustainable work practices/policiesnot current
FPPWAS210AOperate water systemsnot current
FPPWAS340ATroubleshoot and rectify water systemsnot current
FPPWPO210AMonitor and control waste paper operationsnot current
FPPWPO320APrepare and start up waste paper operationsnot current
FPPWPO330ACo-ordinate and implement waste paper shutdownnot current
HLTAID003Provide first aidnot current
MEM09002BInterpret technical drawingnot current
MEM12023APerform engineering measurementsnot current
MEM14005APlan a complete activitynot current
MEM18001CUse hand toolsnot current
MEM18002BUse power tools/hand held operationsnot current
MEM18003CUse tools for precision worknot current
MEM18006CRepair and fit engineering componentsnot current
MEM18007BMaintain and repair mechanical drives and mechanical transmission assembliesnot current
MEM18009BPerform levelling and alignment of machines and engineering componentsnot current
MEM18010CPerform equipment condition monitoring and recordingnot current
MEM18011CShut down and isolate machines/equipmentnot current
MEM18055BDismantle, replace and assemble engineering componentsnot current
MEM30020ADevelop and manage a plan for a simple manufacturing related projectnot current
MSACMS401AEnsure process improvements are sustainednot current
MSACMT270AUse sustainable energy practicesnot current
MSACMT271AUse sustainable environmental practicesnot current
MSACMT440ALead 5S in a manufacturing environmentnot current
MSAPMOHS110AFollow emergency response proceduresnot current
MSAPMOHS220AProvide initial First Aid responsecurrent
MSAPMOPS212AUse organisation computers or data systemsnot current
MSL904001APerform standard calibrationsnot current
MSL973001APerform basic testsnot current
MSS402020AApply quick changeover proceduresnot current
MSS402040AApply 5S proceduresnot current
MSS402050AMonitor process capabilitynot current
MSS402051AApply quality standardsnot current
MSS402081AContribute to the application of a proactive maintenance strategynot current
MSS403032AAnalyse manual handling processesnot current
MSS403051AMistake proof an operational processnot current
MSS404052AApply statistics to operational processesnot current
PMAOHS211BPrepare equipment for emergency responsenot current
TAEASS301BContribute to assessmentnot current
TAEASS401BPlan assessment activities and processesnot current
TAEASS402BAssess competencenot current
TAEASS403BParticipate in assessment validationnot current
TAEDEL301AProvide work skill instructionnot current
TAEDEL404AMentor in the workplacenot current
TLID2003AHandle dangerous goods/hazardous substancesnot current
TLID2010AOperate a forkliftnot current
TLID2013AMove materials mechanically using automated equipmentnot current
TLID2047APrepare cargo for transfer with slingsnot current
TLID3011AConduct specialised forklift operationsnot current
TLID3024AUse specialised liquid bulk transfer equipment (gravity/pressurised)not current
TLID3031ARig loadnot current
TLID3035AOperate a boom type elevating work platformnot current
UEPOPS341AShut down a Steam Turbinenot current
UEPOPS411BRun up a steam turbinenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every FPP training product on the register · Search all training products

Is FPP30110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.