HLT60412 Advanced Diploma of Dental Prosthetics

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for HLT60412 ended on 6 December 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 8 December 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding HLT65015 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
HLT07 — Health Training Package
Currency period ends
6 December 2015
Latest release
Release 2 · 14 September 2013 · 2 releases in all
Supersedes
HLT60407
Superseded by
HLT65015 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. HLT60412Superseded — not equivalentAdvanced Diploma of Dental Prosthetics
  2. not equivalent
  3. HLT65015CurrentAdvanced Diploma of Dental Prosthetics

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • HLT60407HLT60412equivalent6 May 2012

    Updated in V5. Updated core unit HLTFA311A Apply first aid . Updated core WHS units. Clarification to entry requirements.

  • HLT60412HLT65015not equivalent7 December 2015

    Change to packaging rules. Minimum work requirment of 240 hours. Entry Requirement.

Official documents on the register

What training.gov.au lists for HLT60412 and for its training package HLT07 (release 5.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • HLT60412_R2.pdfHLT60412 release 2 · product document · published 13 September 2013
  • HLT60412_R2.docxHLT60412 release 2 · product document · published 26 November 2024

Is HLT60412 on your scope?

This page is the register's record of one product. What it cannot tell you is whether HLT60412 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What HLT60412 is made of

training.gov.au lists 20 units for HLT60412. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 20 listed

CodeUnitCore or electiveIn this product
BSBADM311AMaintain business resourcesN/Anot current
BSBFIA301AMaintain financial recordsN/Anot current
BSBRES401AAnalyse and present research informationN/Anot current
BSBSUS501ADevelop workplace policy and procedures for sustainabilityN/Anot current
HLTAMBFC301DCommunicate with clients and colleagues to support health careN/Anot current
HLTDA407DImplement an individualised oral hygiene programN/Anot current
HLTDA413BImplement an oral hygiene program for older peopleN/Anot current
HLTDP601DIdentify, select and prepare instruments, equipment, materialsN/Anot current
HLTDP602DGather data, conduct dental prosthetic examination and develop treatment planN/Anot current
HLTDP603CTake impressionsN/Anot current
HLTDP604DEstablish and record jaw relationships and select artificial teethN/Anot current
HLTDP605DEvaluate a removable dental prosthesis at try-in stageN/Anot current
HLTDP606DInsert and issue a completed removable dental prosthesisN/Anot current
HLTDP607DPerform maintenance treatment for clients with removeable dental prosthesesN/Anot current
HLTDP608CConstruct and insert an implant retained overdentureN/Anot current
HLTFA311AApply first aidN/Anot current
HLTHIR501CMaintain an effective health work environmentN/Anot current
HLTIN301CComply with infection control policies and proceduresN/Anot current
HLTIN302CProcess reusable instruments and equipment in health workN/Anot current
HLTWHS401AMaintain workplace WHS processesN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every HLT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is HLT60412 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.