Can an RTO still enrol new students in ICP20410?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 26 March 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in ICP20410?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP20410 Certificate II in Printing and Graphic Arts (Print Production…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP20410Superseded — equivalentCertificate II in Printing and Graphic Arts (Print Production Support)
equivalent
ICP20115Superseded — not equivalentCertificate II in Printing and Graphic Arts (General)
not equivalent
ICP20120CurrentCertificate II in Printing and Graphic Arts

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP20405ICP20410equivalent4 July 2010
The register records this supersession but attaches no note on what changed.
ICP20410ICP20115equivalent25 March 2015
Updated to meet Standards for Training Packages 11 qualifications merged into one to allow more flexibility

Official documents on the register

What training.gov.au lists for ICP20410 and for its training package ICP10 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

ICP20410_R1.pdfICP20410 release 1 · product document · published 24 September 2012
ICP20410_R1.docxICP20410 release 1 · product document · published 26 November 2024

Is ICP20410 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP20410 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP20410 is made of

training.gov.au lists 41 units for ICP20410. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 41 listed

Code	Unit	Core or elective	In this product
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
ICPCF222C	Set up and operate in-line cutter	`N/A`	not current
ICPCF242C	Produce basic single or continuous folded product	`N/A`	not current
ICPCF244C	Produce basic collated or inserted (sheet/section) product	`N/A`	not current
ICPCF262C	Produce basic adhesive, mechanical or thermal fastened product	`N/A`	not current
ICPCF263C	Set up and produce hand-fastened product	`N/A`	not current
ICPCF281C	Set up machine for basic laminating	`N/A`	not current
ICPCF282C	Produce basic laminated product	`N/A`	not current
ICPCF341C	Set up machine for complex sequenced or multiple folding	`N/A`	not current
ICPPR271C	Set up for basic coating	`N/A`	not current
ICPPR272C	Produce basic coated product	`N/A`	not current
ICPSU201C	Prepare, load and unload reels and cores on and off machine	`N/A`	not current
ICPSU202C	Prepare, load and unload product on and off machine	`N/A`	not current
ICPSU203C	Prepare and maintain the work area	`N/A`	not current
ICPSU207C	Prepare machine for operation (basic)	`N/A`	not current
ICPSU208C	Operate and monitor machines (basic)	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU221C	Pack and dispatch product	`N/A`	not current
ICPSU222C	Pack and dispatch solid waste	`N/A`	not current
ICPSU224C	Perform basic machine maintenance	`N/A`	not current
ICPSU225C	Perform small machine maintenance	`N/A`	not current
ICPSU235C	Lift loads mechanically	`N/A`	not current
ICPSU236C	Shift loads mechanically	`N/A`	not current
ICPSU241C	Undertake warehouse or stores materials processing	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current
ICPSU261C	Follow OHS practices and identify environmental hazards	`N/A`	not current
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU263C	Perform basic industry calculations	`N/A`	not current
ICPSU280C	Enter data into electronic system	`N/A`	not current
ICPSU281C	Use computer systems	`N/A`	not current

Show the remaining 11 units

Code	Unit	Core or elective	In this product
ICPSU323C	Dispose of waste	`N/A`	not current
ICPSU342C	Undertake inventory procedures	`N/A`	not current
ICPSU357C	Apply quick changeover procedures	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSACMT271A	Use sustainable environmental practices	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICP20410 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.