When must new enrolments into ICP30810 stop?

New enrolments are not permitted from 8 July 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in ICP30810?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP30810 Certificate III in Printing and Graphic Arts (Sacks and Bags)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP30810Superseded — equivalentCertificate III in Printing and Graphic Arts (Sacks and Bags)
equivalent
ICP30812Superseded — equivalentCertificate III in Printing and Graphic Arts (Sacks and Bags)
equivalent
ICP30815Superseded — not equivalentCertificate III in Printing and Graphic Arts (Sacks and Bags)
not equivalent
ICP31315Superseded — not equivalentCertificate III in Print Manufacturing
not equivalent
ICP31320CurrentCertificate III in Print Binding, Finishing and Packaging

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP30805ICP30810equivalent4 July 2010
The register records this supersession but attaches no note on what changed.
ICP30810ICP30812equivalent7 July 2012
Core unit BSBSUS301A Implement and monitor environmentally sustainable work practices replaced with BSBSUS201A Participate in environmentally sustainable work practices. Updated equivalent elective units. OUTCOMES DEEMED EQUIVALENT.

Is ICP30810 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP30810 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP30810 is made of

training.gov.au lists 37 units for ICP30810. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 37 listed

Code	Unit	Core or elective	In this product
BSBFLM309C	Support continuous improvement systems and processes	`N/A`	not current
BSBINN201A	Contribute to workplace innovation	`N/A`	not current
BSBSUS301A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
BSBWOR301A	Organise personal work priorities and development	`N/A`	not current
ICPCF221C	Set up and produce basic guillotined product	`N/A`	not current
ICPCF241C	Set up machine for basic single or continuous folding	`N/A`	not current
ICPCF261C	Set up machine for basic adhesive, mechanical or thermal fastening	`N/A`	not current
ICPCF281C	Set up machine for basic laminating	`N/A`	not current
ICPCF298C	Run and monitor sack and bag machines	`N/A`	not current
ICPCF3100C	Run and monitor in-line tube making machine for sack or bag manufacture	`N/A`	not current
ICPCF398C	Set up in-line bottom making machine for sack or bag manufacture	`N/A`	not current
ICPKN319C	Apply knowledge and processes of converting paper-based products	`N/A`	not current
ICPSU201C	Prepare, load and unload reels and cores on and off machine	`N/A`	not current
ICPSU202C	Prepare, load and unload product on and off machine	`N/A`	not current
ICPSU203C	Prepare and maintain the work area	`N/A`	not current
ICPSU211C	Prepare ink and additives	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU221C	Pack and dispatch product	`N/A`	not current
ICPSU224C	Perform basic machine maintenance	`N/A`	not current
ICPSU225C	Perform small machine maintenance	`N/A`	not current
ICPSU241C	Undertake warehouse or stores materials processing	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU263C	Perform basic industry calculations	`N/A`	not current
ICPSU323C	Dispose of waste	`N/A`	not current
ICPSU342C	Undertake inventory procedures	`N/A`	not current
ICPSU351C	Undertake basic production scheduling	`N/A`	not current
ICPSU352C	Plan operational processes	`N/A`	not current
ICPSU362C	Communicate as part of a work team	`N/A`	not current
ICPSU456C	Control production	`N/A`	not current

Show the remaining 7 units

Code	Unit	Core or elective	In this product
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICP30810 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.