When must new enrolments into ICP31010 stop?

New enrolments are not permitted from 8 July 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in ICP31010?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICP31010 Certificate III in Printing and Graphic Arts (Mail House)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICP31010Superseded — equivalentCertificate III in Printing and Graphic Arts (Mail House)
equivalent
ICP31012Superseded — equivalentCertificate III in Printing and Graphic Arts (Mail House)
equivalent
ICP31015Superseded — not equivalentCertificate III in Printing and Graphic Arts (Mail House)
not equivalent
ICP31315Superseded — not equivalentCertificate III in Print Manufacturing
not equivalent
ICP31320CurrentCertificate III in Print Binding, Finishing and Packaging

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICP31005ICP31010equivalent4 July 2010
The register records this supersession but attaches no note on what changed.
ICP31010ICP31012equivalent7 July 2012
Core unit BSBSUS301A Implement and monitor environmentally sustainable work practices replaced with BSBSUS201A Participate in environmentally sustainable work practices. Elective unit ICPKN313C replaced with ICPKN318C. Updated equivalent elective units. OUTCOMES DEEMED EQUIVALENT.

Is ICP31010 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICP31010 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICP31010 is made of

training.gov.au lists 51 units for ICP31010. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 51 listed

Code	Unit	Core or elective	In this product
BSBSUS301A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
ICAB4135B	Create a simple mark-up language document to specification	`N/A`	not current
ICPCF294C	Set up profile cutting for envelope manufacture	`N/A`	not current
ICPCF3103C	Run and monitor envelope manufacturing machines	`N/A`	not current
ICPCF326C	Undertake pre make-ready for die cutting	`N/A`	not current
ICPCF327C	Set up machine for complex rotary die cutting or embossing	`N/A`	not current
ICPCF341C	Set up machine for complex sequenced or multiple folding	`N/A`	not current
ICPCF342C	Produce complex sequenced or multiple folded product	`N/A`	not current
ICPCF396C	Set up in-line scoring, folding and gluing machine for envelope manufacture	`N/A`	not current
ICPCF406C	Set up and load in-line smart card machine	`N/A`	not current
ICPCF407C	Operate a smart card machine and pack product	`N/A`	not current
ICPKN313C	Apply knowledge and requirements of the converting, binding and finishing sector	`N/A`	not current
ICPPP385C	Operate a database for digital printing	`N/A`	not current
ICPPR282C	Produce and manage basic digital print	`N/A`	not current
ICPPR288A	Produce basic relief printed product	`N/A`	not current
ICPPR383C	Prepare for personalised digital printing	`N/A`	not current
ICPPR384A	Set up and produce basic digital print	`N/A`	not current
ICPPR393A	Set up for basic relief printing	`N/A`	not current
ICPPR484C	Prepare for variable data printing	`N/A`	not current
ICPSU202C	Prepare, load and unload product on and off machine	`N/A`	not current
ICPSU203C	Prepare and maintain the work area	`N/A`	not current
ICPSU211C	Prepare ink and additives	`N/A`	not current
ICPSU212C	Prepare coatings and adhesives	`N/A`	not current
ICPSU216C	Inspect quality against required standards	`N/A`	not current
ICPSU224C	Perform basic machine maintenance	`N/A`	not current
ICPSU225C	Perform small machine maintenance	`N/A`	not current
ICPSU235C	Lift loads mechanically	`N/A`	not current
ICPSU236C	Shift loads mechanically	`N/A`	not current
ICPSU243C	Reconcile process outputs	`N/A`	not current
ICPSU260C	Maintain a safe work environment	`N/A`	not current

Show the remaining 21 units

Code	Unit	Core or elective	In this product
ICPSU262C	Communicate in the workplace	`N/A`	not current
ICPSU271C	Provide basic instruction for a task	`N/A`	not current
ICPSU321C	Pack and dispatch (advanced)	`N/A`	not current
ICPSU342C	Undertake inventory procedures	`N/A`	not current
ICPSU345C	Purchase materials and schedule deliveries	`N/A`	not current
ICPSU351C	Undertake basic production scheduling	`N/A`	not current
ICPSU352C	Plan operational processes	`N/A`	not current
ICPSU362C	Communicate as part of a work team	`N/A`	not current
ICPSU381C	Operate and maintain computer resources	`N/A`	not current
ICPSU487C	Analyse manual handling processes	`N/A`	not current
ICPSU488C	Ensure process improvements are sustained	`N/A`	not current
ICPSU554C	Manage teams	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSAENV272A	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
TLIA4107B	Manually sort mail and parcels	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICP training product on the register · Search all training products

Is ICP31010 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.