Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is ICT20215 on your scope?
This page is the register's record of one product. What it cannot tell you is whether ICT20215 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What ICT20215 is made of
training.gov.au lists 39 units for ICT20215: 5 core and 34 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCOHS1001A | Work safely in the construction industry | !not current |
| ICTTEN201 | Use electrical skills in telecommunications work | !not current |
| ICTTEN202 | Use hand and power tools | ●current |
| ICTWHS204 | Follow work health and safety and environmental policy and procedures | ●current |
| ICTWOR201 | Work effectively in telecommunications technology | !not current |
Elective units 34 listed
| Code | Unit | In this product |
|---|---|---|
| BSBSUS201 | Participate in environmentally sustainable work practices | !not current |
| CPCCCM2007B | Use explosive power tools | !not current |
| CPCCDE3014A | Remove non-friable asbestos | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
| CPCPCM2043A | Carry out WHS requirements | !not current |
| CPCPCM2055A | Work safely on roofs | !not current |
| HLTAID001 | Provide cardiopulmonary resuscitation | !not current |
| HLTAID003 | Provide first aid | !not current |
| ICTBWN303 | Install lead-in module and cable for fibre to the premises | ●current |
| ICTBWN305 | Use optical and radio frequency measuring instruments | !not current |
| ICTCBL207 | Haul underground cable | !not current |
| ICTCBL208 | Splice and terminate optical fibre cable for carriers and service providers | !not current |
| ICTCBL209 | Joint and terminate coaxial cable | !not current |
| ICTCBL211 | Install an above ground equipment enclosure | ●current |
| ICTCBL212 | Erect aerial cable supports | ●current |
| ICTCBL213 | Construct underground telecommunications infrastructure | !not current |
| ICTCBL214 | Fix aerial cable | !not current |
| ICTCBL215 | Joint metallic conductor cable in access network | !not current |
| ICTCBL220 | Install a cable lead-in | !not current |
| ICTCBL302 | Install and terminate optical fibre cable on customer premises | !not current |
| ICTCBL303 | Install and terminate coaxial cable | ●current |
| ICTCBL307 | Install underground enclosures and conduit | !not current |
| ICTCBL308 | Install underground cable | !not current |
| ICTCBL310 | Install aerial cable | !not current |
| ICTCBL320 | Jumper metallic conductor cable in the access network | ●current |
| ICTPMG201 | Prepare site for support installation | ●current |
| ICTTEN207 | Install and test internet protocol devices in convergence networks | ●current |
| ICTTEN302 | Install telecommunications network equipment | !not current |
| ICTTEN303 | Locate, identify and rectify recurrent network faults | !not current |
| ICTTEN310 | Remove and replace electronic circuit boards in carrier equipment | ●current |
Show the remaining 4 elective units
| Code | Unit | In this product |
|---|---|---|
| ICTTEN311 | Inspect, clean and handle optical fibre cable and connectors | !not current |
| ICTWHS201 | Provide telecommunications services safely on roofs | ●current |
| ICTWHS203 | Work safely near power infrastructure | !not current |
| RIIWHS204D | Work safely at heights | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every ICT training product on the register · Search all training products
Is ICT20215 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.