Can an RTO still enrol new students in ICT20510?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 19 July 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in ICT20510?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICT20510 Certificate II in Telecommunications Rigging Installation

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICT20510Superseded — not equivalentCertificate II in Telecommunications Rigging Installation
not equivalent
ICT20513Superseded — not equivalentCertificate II in Telecommunications Fixed Wireless and Rigging Installation
not equivalent
ICT20315Superseded — not equivalentCertificate II in Telecommunications Technology
not equivalent
ICT20319CurrentCertificate II in Telecommunications Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICT20510ICT20513not equivalent18 July 2013
Vocational outcomes deemed not equivalent. Revised title. Overall number of units required to complete qualification increased from 12 to 13; with core unit requirement reduced from 8 to 6 and an additional elective specialist group added.

Official documents on the register

What training.gov.au lists for ICT20510 and for its training package ICT10 (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

ICT20510_R1.pdfICT20510 release 1 · product document · published 20 July 2012
ICT20510_R1.docxICT20510 release 1 · product document · published 26 November 2024

Is ICT20510 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICT20510 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICT20510 is made of

training.gov.au lists 37 units for ICT20510. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 37 listed

Code	Unit	Core or elective	In this product
BSBCUS201A	Deliver a service to customers	`N/A`	not current
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLRG3002A	Licence to perform rigging intermediate level	`N/A`	not current
CPCCLRG4001A	Licence to perform rigging advanced level	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
ICTCBL2005A	Install customer cable support systems	`N/A`	not current
ICTCBL2006A	Place and secure customer cable	`N/A`	not current
ICTCBL2008A	Terminate metallic conductor customer cable	`N/A`	not current
ICTCBL2016A	Joint metallic conductor cable on customer premises	`N/A`	not current
ICTCBL2017A	Alter services to existing cable system	`N/A`	not current
ICTCBL2065A	Splice and terminate optical fibre cable for carriers and service providers	`N/A`	not current
ICTCBL2066A	Joint and terminate coaxial cable	`N/A`	not current
ICTCBL2068A	Install a telecommunications service to a building	`N/A`	not current
ICTCBL2131A	Install an above ground equipment enclosure	`N/A`	not current
ICTCBL2132A	Erect aerial cable supports	`N/A`	not current
ICTCBL2133A	Construct underground telecommunications infrastructure	`N/A`	not current
ICTCBL2134A	Fix aerial cable	`N/A`	not current
ICTCBL2136A	Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule	`N/A`	not current
ICTCBL2139A	Apply safe technical work practices for cabling registration	`N/A`	not current
ICTCBL2162A	Install a cable lead-in	`N/A`	not current
ICTCMP2022A	Organise and monitor cabling to ensure compliance with regulatory and industry standards	`N/A`	not current
ICTOHS2080A	Provide telecommunications services safely on roofs	`N/A`	not current
ICTOHS2153A	Work safely near power infrastructure	`N/A`	not current
ICTOHS2170A	Follow Occupational Health and Safety and environmental policy and procedures	`N/A`	not current
ICTPMG2130A	Prepare site for support installation	`N/A`	not current
ICTPMG2173A	Plan, organise and undertake work activities	`N/A`	not current
ICTRFN2163A	Install a satellite antenna	`N/A`	not current
ICTRFN2164A	Install a terrestrial antenna	`N/A`	not current

Show the remaining 7 units

Code	Unit	Core or elective	In this product
ICTTCR2188A	Use rigging practices and systems on telecommunications network structures	`N/A`	not current
ICTTCR2189A	Use operational safety in a telecommunications rigging environment	`N/A`	not current
ICTTCR2190A	Use safe rigging practices to climb and perform rescues on telecommunications network structures	`N/A`	not current
ICTTEN2007A	Use electrical skills in telecommunications work	`N/A`	not current
ICTTEN2105A	Install and test an internet protocol device in convergence networks	`N/A`	not current
ICTTEN2140A	Use hand and power tools	`N/A`	not current
ICTWOR2141A	Work effectively in a telecommunications technology team	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICT20510 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.