When must new enrolments into ICT40610 stop?

New enrolments are not permitted from 7 February 2015 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in ICT40610?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICT40610 Certificate IV in Telecommunications Networks Technology

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICT40610Superseded — equivalentCertificate IV in Telecommunications Networks Technology
equivalent
ICT40613Superseded — not equivalentCertificate IV in Telecommunications Networks Technology
not equivalent
ICT41215Superseded — not equivalentCertificate IV in Telecommunications Engineering Technology
not equivalent
ICT41219CurrentCertificate IV in Telecommunications Engineering Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICT40608ICT40610not equivalent14 June 2010
The register records this supersession but attaches no note on what changed.
ICT40610ICT40613equivalent6 February 2014
Vocational outcomes deemed equivalent. Change in OHS core unit. Other units updated to current versions. Additional electives included to provide broader choice.

Is ICT40610 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICT40610 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICT40610 is made of

training.gov.au lists 68 units for ICT40610. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 68 listed

Code	Unit	Core or elective	In this product
BSBSMB401A	Establish legal and risk management requirements of small business	`N/A`	not current
BSBSMB405A	Monitor and manage small business operations	`N/A`	not current
BSBSMB407A	Manage a small team	`N/A`	not current
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
ICAA4041C	Determine and confirm client business expectations and needs	`N/A`	not current
ICAB4059B	Develop detailed technical design	`N/A`	not current
ICAB4235B	Build basic perimeter security into a network	`N/A`	not current
ICAB4236B	Build security into a virtual private network	`N/A`	not current
ICAB4240C	Build an enterprise wireless network	`N/A`	not current
ICAI4029C	Install network hardware to a network	`N/A`	not current
ICAI4030B	Install software to networked computers	`N/A`	not current
ICAT3025B	Run standard diagnostic tests	`N/A`	not current
ICTBWN3205A	Use optical and radio frequency measuring instruments	`N/A`	not current
ICTCBL4002A	Prepare design drawings and specification for a cable installation	`N/A`	not current
ICTCBL4004A	Schedule and supply cabling installation	`N/A`	not current
ICTCBL4023A	Supervise cabling project	`N/A`	not current
ICTCBL4057A	Test cable bearers	`N/A`	not current
ICTCBL4099A	Remotely locate and identify cable network faults	`N/A`	not current
ICTDRE4166A	Integrate customer digital reception equipment	`N/A`	not current
ICTDRE4167A	Integrate data delivery modes	`N/A`	not current
ICTOHS2153A	Work safely near power infrastructure	`N/A`	not current
ICTOHS2170A	Follow Occupational Health and Safety and environmental policy and procedures	`N/A`	not current
ICTOPN4115A	Install and test a dense wavelength division multiplexing system	`N/A`	not current
ICTOPN4116A	Use advanced optical test equipment	`N/A`	not current
ICTOPN4117A	Prepare activity plans and specifications for a fibre to the x installation	`N/A`	not current
ICTPMG4048A	Schedule installation of customer premises equipment	`N/A`	not current
ICTPMG4152A	Manage the delivery of network infrastructure	`N/A`	not current
ICTRFN4095A	Conduct radio frequency measurements	`N/A`	not current
ICTRFN4158A	Select an antenna system for radio communications	`N/A`	not current
ICTRFN4159A	Test and repair cellular network equipment	`N/A`	not current

Show the remaining 38 units

Code	Unit	Core or elective	In this product
ICTRFN4174A	Undertake radio communications signals monitoring	`N/A`	not current
ICTRFN4177A	Install radio communications base station equipment	`N/A`	not current
ICTRFN4178A	Maintain hybrid fibre coaxial broadband cable network	`N/A`	not current
ICTSUS4183A	Install and test renewable energy system for ICT networks	`N/A`	not current
ICTSUS4184A	Install and test power saving hardware	`N/A`	not current
ICTSUS4185A	Install and test power management software	`N/A`	not current
ICTSUS4186A	Install thin client applications for power over ethernet	`N/A`	not current
ICTTEN2007A	Use electrical skills in telecommunications work	`N/A`	not current
ICTTEN2105A	Install and test an internet protocol device in convergence networks	`N/A`	not current
ICTTEN2140A	Use hand and power tools	`N/A`	not current
ICTTEN2209A	Build and maintain a secure network	`N/A`	not current
ICTTEN3056A	Install telecommunications network equipment	`N/A`	not current
ICTTEN4001A	Identify requirements for customer telecommunications equipment	`N/A`	not current
ICTTEN4003A	Estimate and quote for customer telecommunications equipment installation	`N/A`	not current
ICTTEN4040A	Assign a transmission path	`N/A`	not current
ICTTEN4050A	Install and configure a wireless mesh network	`N/A`	not current
ICTTEN4051A	Install configuration programs on PC based customer equipment	`N/A`	not current
ICTTEN4072A	Effect changes to existing customer premises equipment systems and equipment	`N/A`	not current
ICTTEN4073A	Cut over customer premises equipment major upgrades	`N/A`	not current
ICTTEN4076A	Complete equipment and software upgrades	`N/A`	not current
ICTTEN4078A	Commission an electronic system	`N/A`	not current
ICTTEN4081A	Locate, diagnose and rectify faults	`N/A`	not current
ICTTEN4085A	Monitor, analyse and action telecommunications network alarms	`N/A`	not current
ICTTEN4086A	Undertake routine maintenance of the telecommunications network	`N/A`	not current
ICTTEN4087A	Undertake remote diagnosis and repair of network faults	`N/A`	not current
ICTTEN4102A	Repair telecommunication system faults	`N/A`	not current
ICTTEN4126A	Install and configure internet protocol TV in a home network	`N/A`	not current
ICTTEN4198A	Install, configure and test an internet protocol network	`N/A`	not current
ICTTEN4199A	Install, configure and test a router	`N/A`	not current
ICTTEN4202A	Install and test a radio frequency identification system	`N/A`	not current
ICTTEN4210A	Implement and troubleshoot enterprise routers and switches	`N/A`	not current
ICTTEN4211A	Design, install and configure an internetwork	`N/A`	not current
ICTTEN4212A	Apply advanced routing protocols to network design	`N/A`	not current
ICTTEN4213A	Configure and troubleshoot advanced network switching	`N/A`	not current
ICTTEN4214A	Install and maintain a wide area network	`N/A`	not current
ICTTEN4215A	Install and configure internet protocol TV in a service provider network	`N/A`	not current
ICTTEN4229A	Design, install and configure a customer smart grid network	`N/A`	not current
ICTTEN5201A	Install, configure and test a server	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICT training product on the register · Search all training products

Is ICT40610 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.