Can an RTO still enrol new students in ICT50202?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 15 June 2011. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in ICT50202?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

ICT50202 Diploma of Telecommunications Engineering

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

ICT50202Superseded — not equivalentDiploma of Telecommunications Engineering
not equivalent
ICT50210Superseded — equivalentDiploma of Telecommunications Network Engineering
equivalent
ICT51015Superseded — not equivalentDiploma of Telecommunications Engineering
not equivalent
ICT50220CurrentDiploma of Information Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

ICT50202ICT50210not equivalent14 June 2010
The register records this supersession but attaches no note on what changed.

Is ICT50202 on your scope?

This page is the register's record of one product. What it cannot tell you is whether ICT50202 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What ICT50202 is made of

training.gov.au lists 26 units for ICT50202. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 26 listed

Code	Unit	Core or elective	In this product
ICAITB069B	Develop software	`N/A`	not current
ICTTC024C	Provide high level consultancy and technical support in the CPE sector	`N/A`	not current
ICTTC025C	Develop and deliver training associated with new and/or modified products	`N/A`	not current
ICTTC026C	Develop and deliver technical information to all company staff	`N/A`	not current
ICTTC027C	Develop CPE installation project plans	`N/A`	not current
ICTTC031C	Prepare a project brief	`N/A`	not current
ICTTC037C	Design a telecommunications project	`N/A`	not current
ICTTC038C	Design an electronic network	`N/A`	not current
ICTTC039C	Prepare project specifications	`N/A`	not current
ICTTC058C	Acceptance test new systems and equipment	`N/A`	not current
ICTTC059C	Commission telecommunications network equipment	`N/A`	not current
ICTTC060C	Integrate new systems and equipment into the telecommunications network	`N/A`	not current
ICTTC061C	Cutover new and/or replacement network equipment	`N/A`	not current
ICTTC076C	Complete equipment/software upgrades	`N/A`	not current
ICTTC083C	Locate and rectify complex CPE system and equipment faults	`N/A`	not current
ICTTC084C	Provide expert advice and support on very complex CPE faults	`N/A`	not current
ICTTC090C	Analyse and organise repair of complex telecommunications network faults	`N/A`	not current
ICTTC092C	Undertake outage management	`N/A`	not current
ICTTC097C	Conduct tests on handset enhancements and international roaming agreements	`N/A`	not current
ICTTC142A	Use photonics devices	`N/A`	not current
ICTTC143A	Integrate specialised photonics devices into telecommunications systems	`N/A`	not current
ICTTC144A	Use a virtual instrument	`N/A`	not current
ICTTC145A	Perform photonics device laboratory techniques	`N/A`	not current
ICTTC146A	Test and manipulate WDM devices and systems	`N/A`	not current
ICTTC147A	Administer a data communications network (LAN or WAN)	`N/A`	not current
ICTTC148A	Test and measure mobile phone equipment performance	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every ICT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is ICT50202 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.