Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is ICT50410 on your scope?
This page is the register's record of one product. What it cannot tell you is whether ICT50410 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What ICT50410 is made of
training.gov.au lists 32 units for ICT50410: 6 core and 26 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 6 listed
| Code | Unit | In this product |
|---|---|---|
| BSBPMG522A | Undertake project work | !not current |
| BSBSUS501A | Develop workplace policy and procedures for sustainability | !not current |
| ICTPMG5031A | Prepare a project brief | !not current |
| ICTRFN6171A | Produce and evaluate architecture designs for WiMAX networks | !not current |
| ICTTEN5037A | Design a telecommunications project | !not current |
| ICTTEN5217A | Plan a wireless mesh network | !not current |
Elective units 26 listed
| Code | Unit | In this product |
|---|---|---|
| ICAICT508A | Evaluate vendor products and equipment | !not current |
| ICANWK516A | Determine best-fit topology for a local network | !not current |
| ICTCMP5176A | Undertake radio communications site audit | !not current |
| ICTEDU5025A | Develop and deliver training associated with new and modified products | !not current |
| ICTITU5144A | Test telecommunications network using virtual instruments | !not current |
| ICTPMG5027A | Develop customer premises equipment installation project plans | !not current |
| ICTPMG5039A | Prepare project specifications | !not current |
| ICTPRO5026A | Develop training, marketing and sales resources for telecommunications products | !not current |
| ICTRFN5097A | Test cellular handset enhancements and international roaming agreements | !not current |
| ICTRFN5148A | Test and measure cellular phone and network equipment performance | !not current |
| ICTRFN5179A | Evaluate and analyse radio frequency signal coverage plots | !not current |
| ICTRFN6098B | Monitor the capacity of and recommend changes to the cellular mobile network | !not current |
| ICTSUS5187A | Implement server virtualisation for a sustainable ICT system | !not current |
| ICTTEN5038A | Design an electronic system for a telecommunications network | !not current |
| ICTTEN5058A | Acceptance test new systems and equipment | !not current |
| ICTTEN5059A | Commission telecommunications network equipment | !not current |
| ICTTEN5060A | Integrate new systems and equipment into the telecommunications network | !not current |
| ICTTEN5061A | Cut over new and replacement network equipment | !not current |
| ICTTEN5083A | Locate, diagnose and rectify complex faults | !not current |
| ICTTEN5084A | Provide expert advice and support on complex faults | !not current |
| ICTTEN5092A | Undertake planned outage management | !not current |
| ICTTEN5147A | Administer a data communications network | !not current |
| ICTTEN5168A | Design and implement an enterprise voice over internet protocol and a unified communications network | !not current |
| ICTTEN5201A | Install, configure and test a server | !not current |
| ICTTEN5203A | Dimension and design a radio frequency identification system | !not current |
| ICTTEN5204A | Produce technical solutions from business specifications | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every ICT training product on the register · Search all training products
Is ICT50410 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.