When must new enrolments into LMF20309 stop?

New enrolments are not permitted from 10 December 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMF20309?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMF20309 Certificate II in Furniture Making

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMF20309Superseded — equivalentCertificate II in Furniture Making
equivalent
MSF20313Superseded — not equivalentCertificate II in Furniture Making
not equivalent
MSF20322CurrentCertificate II in Cabinet Making and Timber Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMF20302LMF20309equivalent12 May 2009
The register records this supersession but attaches no note on what changed.
LMF20309MSF20313equivalent9 December 2013
The register records this supersession but attaches no note on what changed.

Is LMF20309 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMF20309 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMF20309 is made of

training.gov.au lists 41 units for LMF20309. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 41 listed

Code	Unit	Core or elective	In this product
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
LMFFF2004B	Prepare surfaces for finishing	`N/A`	not current
LMFFF2006B	Apply surface coatings by spray gun	`N/A`	not current
LMFFM2001B	Use furniture making sector hand and power tools	`N/A`	not current
LMFFM2002B	Assemble furnishing components	`N/A`	not current
LMFFM2003B	Select and apply hardware	`N/A`	not current
LMFFM2004B	Apply sheet laminates by hand	`N/A`	not current
LMFFM2005B	Join solid timber	`N/A`	not current
LMFFM2006B	Hand make timber joints	`N/A`	not current
LMFFM2007B	Follow plans to assemble production furniture	`N/A`	not current
LMFFM2008B	Bend and form cane	`N/A`	not current
LMFFM2009B	Construct cane furniture	`N/A`	not current
LMFFM2010B	Set up, operate and maintain basic static machines	`N/A`	not current
LMFFM2011B	Apply manufactured board conversion techniques	`N/A`	not current
LMFFM2012B	Set up, operate and maintain pressure and clamping machines	`N/A`	not current
LMFKB2001A	Prepare for cabinet installation	`N/A`	not current
LMFKB2002A	Provide assistance in cabinet installation	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMT220A	Apply quick changeover procedures	`N/A`	not current
MSACMT221A	Apply Just in Time (JIT) procedures	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT250A	Monitor process capability	`N/A`	not current
MSACMT251A	Apply quality standards	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current

Show the remaining 11 units

Code	Unit	Core or elective	In this product
MSACMT271A	Use sustainable environmental practices	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSACMT281A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current
MSAPMSUP201A	Receive or despatch goods	`N/A`	current
MSAPMSUP240A	Undertake minor maintenance	`N/A`	not current
MSAPMSUP273A	Handle goods	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Is LMF20309 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.