LMF20908 Certificate II in Flooring Technology

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in LMF20908 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for LMF20908, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
LMF02 — Furnishing Training Package
Currency period ends
8 December 2013
Latest release
Release 2 · 4 October 2011 · 2 releases in all
Supersedes
LMF20102
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from LMF20908. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • LMF20102LMF20908not equivalent12 May 2009

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for LMF20908 and for its training package LMF02 (release 8.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • LMF20908_R2.docxLMF20908 release 2 · product document · published 26 November 2024
  • LMF20908_R2.pdfLMF20908 release 2 · product document · published 20 July 2012

Is LMF20908 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMF20908 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMF20908 is made of

training.gov.au lists 34 units for LMF20908. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 34 listed

CodeUnitCore or electiveIn this product
LMFFL2001AUse flooring technology sector hand and power toolsN/Anot current
LMFFL2002AReceive and prepare floor covering materials for installationN/Anot current
LMFFL2003ASelect, operate and maintain floor covering cutting machineN/Anot current
LMFFL2004AMoisture test timber and concrete floorsN/Anot current
LMFFL2101ARemove existing floor coveringsN/Anot current
LMFFL2102APrepare, select and apply smoothing and patching compoundsN/Anot current
LMFFL2103ASelect and apply appropriate compounds and additivesN/Anot current
LMFFL2104APrepare concrete sub-floors using wet cleaning methodsN/Anot current
LMFFL2105ASelect, prepare and apply moisture barriers and damp proof membranes to concrete sub-floorsN/Anot current
LMFFL2106APrepare walls for coveringsN/Anot current
LMFFL2107ASelect, operate and maintain grinding equipmentN/Anot current
LMFFL2108ASelect, operate and maintain shot blasting equipmentN/Anot current
LMFFL2109ASelect, operate and maintain demolition equipmentN/Anot current
LMFFL2110ASelect, operate and maintain scarifying equipmentN/Anot current
LMFFL2111ACoarse sand timber flooringN/Anot current
LMFFL2112AInstall hard underlaysN/Anot current
LMFFL2201AInstall carpet cushion/underlays and gripper accessoriesN/Anot current
LMFFL2202AInstall unpatterned tufted and bonded carpet floor coveringsN/Anot current
LMFFL2203AInstall carpet tiles using standard installation proceduresN/Anot current
LMFFL2204AInstall unpatterned tufted and bonded carpet floor coverings to stairsN/Anot current
LMFFL2301AInstall lay flat vinyl floor coveringsN/Anot current
LMFFL2302AInstall resilient tiles using standard installation proceduresN/Anot current
LMFFL2501AInstall laminate and engineered timber flooringN/Anot current
LMFFL2502AInstall impact and sound absorption underlayN/Anot current
LMFFL2503ANail strip timber flooringN/Anot current
LMFFL2504AInstall expansion jointsN/Anot current
LMFFL2505AInstall mouldings and edge trims to timber flooringN/Anot current
LMFFL3101AInspect sub-floorsN/Anot current
LMFFL3102APrepare, select and apply screed to concrete sub-floorsN/Anot current
MSAENV272BParticipate in environmentally sustainable work practicesN/Anot current
Show the remaining 4 units
CodeUnitCore or electiveIn this product
MSAPMOHS100AFollow OHS proceduresN/Anot current
MSAPMOPS101AMake measurementsN/Anot current
MSAPMSUP102ACommunicate in the workplaceN/Anot current
MSAPMSUP106AWork in a teamN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Take this with you — one email with how the register lists LMF20908 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is LMF20908 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.