LMFFF3009B Set up, operate and maintain CNC coating systems

Supersededtraining.gov.au: supersededEquivalent

The currency period for LMFFF3009B ended on 8 December 2013 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 10 December 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
LMF02 — Furnishing Training Package
Currency period ends
8 December 2013
Latest release
Release 1 · 11 May 2009
Supersedes
nothing — no earlier product listed
Superseded by
MSFFF3009 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. LMFFF3009BSuperseded — equivalentSet up, operate and maintain CNC coating systems
  2. equivalent
  3. MSFFF3009Superseded — equivalentSet up, operate and maintain computer numerically controlled (CNC) coating systems
  4. equivalent
  5. MSFFF3018CurrentSet up, operate and maintain computer numerically controlled (CNC) coating systems

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • LMFFF3009BMSFFF3009equivalent9 December 2013

    Supersedes and is equivalent to LMFFF3009B Set up, operate and maintain CNC coating systems

Is LMFFF3009B on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMFFF3009B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where LMFFF3009B is used

training.gov.au lists LMFFF3009B inside 1 training product, which it no longer lists as current. It is below, with the register's own core or elective flag for LMFFF3009B in that product.

Products no longer current 1 listed

The register still records LMFFF3009B inside this one, but it no longer recommends it as current. It is here because a scope history or an old enrolment can still point at it.

CodeTraining productTypeLMFFF3009B is
LMF30202Certificate III in Furniture FinishingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMF training product on the register · Search all training products

Is LMFFF3009B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.