Can an RTO still enrol new students in LMT20607?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 4 July 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in LMT20607?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT20607 Certificate II in Clothing Production (Intermediate)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT20607Superseded — not equivalentCertificate II in Clothing Production (Intermediate)
not equivalent
MST20116Superseded — not equivalentCertificate II in TCF Production Support
not equivalent
MST20722CurrentCertificate II in Apparel, Fashion and Textiles

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT20607MST20116not equivalent3 July 2016
Supersedes and not equivalent to LMT20607 Certificate II in Clothing Production (Intermediate)

Official documents on the register

What training.gov.au lists for LMT20607 and for its training package LMT07 (release 4.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

LMT20607_R2.docxLMT20607 release 2 · product document · published 26 November 2024
LMT20607_R2.pdfLMT20607 release 2 · product document · published 6 July 2012

Is LMT20607 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT20607 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT20607 is made of

training.gov.au lists 44 units for LMT20607. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 44 listed

Code	Unit	Core or elective	In this product
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTCL2002B	Provide hand sewing and finishing support	`N/A`	not current
LMTCL2003B	Identify fibres and fabrics	`N/A`	not current
LMTCL2004B	Sew components	`N/A`	not current
LMTCL2005B	Use specialised machinery or processes to assist assembly production	`N/A`	not current
LMTCL2006B	Press work	`N/A`	not current
LMTCL2007B	Lay up, mark and cut uncomplicated fabrics and lays	`N/A`	not current
LMTCL2008B	Finish garment production	`N/A`	not current
LMTCL2009B	Despatch work	`N/A`	not current
LMTCL2010B	Modify patterns to create basic styles	`N/A`	not current
LMTCL2011B	Draw and interpret a basic sketch	`N/A`	not current
LMTCL2012B	Organise and plan own work in a home-based production environment	`N/A`	not current
LMTCL2013B	Block and shape headwear by machine	`N/A`	not current
LMTCL2014B	Pack, store, handle and despatch headwear	`N/A`	not current
LMTCL2015B	Finish headwear	`N/A`	not current
LMTCL2016B	Trim headwear	`N/A`	not current
LMTCL2017B	Access and use information resources for clothing production operations	`N/A`	not current
LMTCL2018B	Perform basic maintenance of headwear	`N/A`	not current
LMTFD2005B	Identify design process for fashion designs	`N/A`	not current
LMTGN2001B	Follow defined OHS policies and procedures	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2004B	Work in a team environment	`N/A`	not current
LMTGN2005B	Perform minor maintenance	`N/A`	not current
LMTGN2006B	Perform test or inspection to check product quality	`N/A`	not current
LMTGN2007B	Select, transfer and remove materials and products	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN2010B	Perform tasks to support production	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current

Show the remaining 14 units

Code	Unit	Core or elective	In this product
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSS402001A	Apply competitive systems and practices	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402010A	Manage the impact of change on own work	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS402081A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is LMT20607 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.