When must new enrolments into LMT32011 stop?

New enrolments are not permitted from 25 July 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT32011?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT32011 Certificate III in Digitising and Computerised Embroidery

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT32011Superseded — equivalentCertificate III in Digitising and Computerised Embroidery
equivalent
MST30819Superseded — not equivalentCertificate III in Applied Fashion Design and Technology
not equivalent
MST31022CurrentCertificate III in Apparel, Fashion and Textiles

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT32011MST30819equivalent24 July 2019
Release 1. Supersedes and is equivalent to LMT32011 Certificate III in Digitising and Computerised Embroidery

Is LMT32011 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT32011 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT32011 is made of

training.gov.au lists 51 units for LMT32011. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 51 listed

Code	Unit	Core or elective	In this product
BSBDES202A	Evaluate the nature of design in a specific industry context	`N/A`	not current
BSBDES301A	Explore the use of colour	`N/A`	not current
BSBDES302A	Explore and apply the creative design process to 2D forms	`N/A`	not current
BSBSMB304A	Determine resource requirements for the micro business	`N/A`	not current
BSBSMB305A	Comply with regulatory, taxation and insurance requirements for the micro business	`N/A`	not current
CUFCMP301A	Implement copyright arrangements	`N/A`	not current
ICPPR282C	Produce and manage basic digital print	`N/A`	not current
ICPPR284A	Introduction to colour management	`N/A`	not current
ICPPR383C	Prepare for personalised digital printing	`N/A`	not current
ICPPR385A	Apply software applications to digital production	`N/A`	not current
ICPPR386A	Troubleshoot digital media	`N/A`	not current
ICPPR387A	Use colour management for production	`N/A`	not current
ICPPR388A	Preflight and import complex images for digital devices	`N/A`	not current
ICPPR389A	Manage digital files	`N/A`	not current
ICPPR390A	Generate a proof for digital production	`N/A`	not current
ICPPR392A	Set up and produce specialised digital print	`N/A`	not current
ICPSU281C	Use computer systems	`N/A`	not current
LMTCL2003B	Identify fibres and fabrics	`N/A`	not current
LMTCL2006B	Press work	`N/A`	not current
LMTCL2009B	Despatch work	`N/A`	not current
LMTCL2011B	Draw and interpret a basic sketch	`N/A`	not current
LMTCL2012B	Organise and plan own work in a home-based production environment	`N/A`	not current
LMTDE3001A	Apply hooping and fabric handling techniques	`N/A`	not current
LMTDE3002A	Digitise artwork for computerised embroideries	`N/A`	not current
LMTDE3003A	Apply advanced digitising techniques to produce computerised embroideries	`N/A`	not current
LMTDE3004A	Generate artwork for computerised embroideries	`N/A`	not current
LMTDE3005A	Replicate traditional hand craft techniques	`N/A`	not current
LMTDE3006A	Digitise text to produce embroidered lettering	`N/A`	not current
LMTDE3007A	Demonstrate features of digitised embroidery machines	`N/A`	not current
LMTDE3008A	Produce embroidery from digitised images	`N/A`	not current

Show the remaining 21 units

Code	Unit	Core or elective	In this product
LMTDE3009A	Maintain computerised embroidery machines	`N/A`	not current
LMTGN2001B	Follow defined OHS policies and procedures	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2004B	Work in a team environment	`N/A`	not current
LMTGN2005B	Perform minor maintenance	`N/A`	not current
LMTGN2006B	Perform test or inspection to check product quality	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN3002B	Organise and plan own work to achieve planned outcomes	`N/A`	not current
LMTGN3003B	Estimate and cost job	`N/A`	not current
LMTTX3017A	Set up, adjust and maintain industrial sewing machines	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMSUP382A	Provide coaching/mentoring in the workplace	`N/A`	not current
MSS402010A	Manage the impact of change on own work	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
SIRXSLS002A	Advise on products and services	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT32011 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.