When must new enrolments into LMT40307 stop?

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT40307?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT40307 Certificate IV in Clothing Production

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT40307Superseded — equivalentCertificate IV in Clothing Production
equivalent
MST40216Superseded — equivalentCertificate IV in Clothing Production
equivalent
MST40219Superseded — not equivalentCertificate IV in Clothing Production
not equivalent
MST40222CurrentCertificate IV in Apparel and Fashion

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT40307MST40216equivalent3 July 2016
Supersedes and is equivalent to LMT40307 Certificate IV in Clothing Production

Is LMT40307 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT40307 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT40307 is made of

training.gov.au lists 108 units for LMT40307. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 108 listed

Code	Unit	Core or elective	In this product
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTCL2002B	Provide hand sewing and finishing support	`N/A`	not current
LMTCL2003B	Identify fibres and fabrics	`N/A`	not current
LMTCL2004B	Sew components	`N/A`	not current
LMTCL2005B	Use specialised machinery or processes to assist assembly production	`N/A`	not current
LMTCL2006B	Press work	`N/A`	not current
LMTCL2007B	Lay up, mark and cut uncomplicated fabrics and lays	`N/A`	not current
LMTCL2008B	Finish garment production	`N/A`	not current
LMTCL2009B	Despatch work	`N/A`	not current
LMTCL2010B	Modify patterns to create basic styles	`N/A`	not current
LMTCL2011B	Draw and interpret a basic sketch	`N/A`	not current
LMTCL2012B	Organise and plan own work in a home-based production environment	`N/A`	not current
LMTCL2013B	Block and shape headwear by machine	`N/A`	not current
LMTCL2014B	Pack, store, handle and despatch headwear	`N/A`	not current
LMTCL2015B	Finish headwear	`N/A`	not current
LMTCL2016B	Trim headwear	`N/A`	not current
LMTCL2017B	Access and use information resources for clothing production operations	`N/A`	not current
LMTCL2018B	Perform basic maintenance of headwear	`N/A`	not current
LMTCL3001B	Identify fabric performance and handling requirements	`N/A`	not current
LMTCL3002B	Prepare and produce sewn garment	`N/A`	not current
LMTCL3003B	Perform garment repairs and alterations	`N/A`	not current
LMTCL3004B	Press whole garments	`N/A`	not current
LMTCL3005B	Lay up and cut complicated fabrics and lays	`N/A`	not current
LMTCL3006B	Assemble bra or swimwear	`N/A`	not current
LMTCL3007B	Embellish garment by hand or machine	`N/A`	not current
LMTCL3008B	Set and produce digital embroidery	`N/A`	not current
LMTCL3009B	Develop patterns from a block using basic patternmaking principles	`N/A`	not current
LMTCL3010B	Sew woven and stretch knit garments	`N/A`	not current
LMTCL3011B	Contribute to garment production process improvements	`N/A`	not current
LMTCL3012B	Make marker for complicated fabrics and lays	`N/A`	not current

Show the remaining 78 units

Code	Unit	Core or elective	In this product
LMTCL3013B	Interpret patterns and apply pattern information	`N/A`	not current
LMTCL3014B	Interact and communicate with garment production personnel	`N/A`	not current
LMTCL4001A	Perform sample machining of bespoke garments	`N/A`	not current
LMTCL4002A	Assemble and fit commercially tailored or bespoke garments	`N/A`	not current
LMTCL4003A	Measure, lay-up and cut custom-made garments	`N/A`	not current
LMTCL4004A	Determine and perform garment maintenance or repair	`N/A`	not current
LMTFD2005B	Identify design process for fashion designs	`N/A`	not current
LMTFD3003B	Prepare design concept for a simple garment	`N/A`	not current
LMTFD3004B	Draw a trade drawing for fashion design	`N/A`	not current
LMTFD4002B	Apply principles of colour theory to fashion design development	`N/A`	not current
LMTFD4003B	Assist in preparation of preliminary design concepts	`N/A`	not current
LMTFD4006B	Interact and network with fashion industry participants	`N/A`	not current
LMTFD4007B	Conduct quality assurance for patterns and garments	`N/A`	not current
LMTFD4008B	Construct stock size block for garment to meet size and fit specifications	`N/A`	not current
LMTFD4009B	Create and edit digital embroidery designs	`N/A`	not current
LMTFD4010B	Create pattern to meet design specifications applying advanced pattern-making principles	`N/A`	not current
LMTFD4011B	Cut fabrics for prototype designs	`N/A`	not current
LMTFD4012B	Develop product specifications for fashion design	`N/A`	not current
LMTFD4013B	Grade 2D patterns	`N/A`	not current
LMTFD4015B	Create pattern from block to meet customer specifications	`N/A`	not current
LMTFD4016B	Sew design prototypes	`N/A`	not current
LMTFD4017B	Source materials and resources for production of fashion designs	`N/A`	not current
LMTFD4018B	Use and apply sizing systems appropriate for fashion design	`N/A`	not current
LMTFD4020B	Use electronic fashion design tools	`N/A`	not current
LMTFD4021B	Drape fabrics to make patterns	`N/A`	not current
LMTFD5002B	Develop and test patterns for bras and swimwear	`N/A`	not current
LMTFD5003B	Analyse fit model	`N/A`	not current
LMTFD5012B	Perform contour draping	`N/A`	not current
LMTFD5014B	Construct complex blocks for fashion garments	`N/A`	not current
LMTFD5015B	Develop patterns for complex fashion garments	`N/A`	not current
LMTFD5016B	Grade shaped patterns	`N/A`	not current
LMTFD5018B	Determine and specify advanced construction processes	`N/A`	not current
LMTFD5019B	Analyse individual fit and make pattern alterations	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2004B	Work in a team environment	`N/A`	not current
LMTGN2005B	Perform minor maintenance	`N/A`	not current
LMTGN2006B	Perform test or inspection to check product quality	`N/A`	not current
LMTGN2007B	Select, transfer and remove materials and products	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN2010B	Perform tasks to support production	`N/A`	not current
LMTGN3001B	Control production in a section of a textiles, clothing and footwear enterprise	`N/A`	not current
LMTGN3002B	Organise and plan own work to achieve planned outcomes	`N/A`	not current
LMTGN4001A	Coordinate or set up machines for product change	`N/A`	not current
LMTGN4003A	Install and commission process and machine control programs	`N/A`	not current
LMTGN4005A	Plan and implement production within a work area	`N/A`	not current
LMTGN4010A	Implement and monitor OHS in the workplace	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSS402001A	Apply competitive systems and practices	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402010A	Manage the impact of change on own work	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS402081A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSS403001A	Implement competitive systems and practices	`N/A`	not current
MSS403002A	Ensure process improvements are sustained	`N/A`	not current
MSS403010A	Facilitate change in an organisation implementing competitive systems and practices	`N/A`	not current
MSS403021A	Facilitate a Just in Time system	`N/A`	not current
MSS403030A	Improve cost factors in work practices	`N/A`	not current
MSS403032A	Analyse manual handling processes	`N/A`	not current
MSS403040A	Facilitate and improve implementation of 5S	`N/A`	not current
MSS403051A	Mistake proof an operational process	`N/A`	not current
MSS404050A	Undertake process capability improvements	`N/A`	not current
MSS404052A	Apply statistics to operational processes	`N/A`	not current
MSS404060A	Facilitate the use of planning software systems in a work area or team	`N/A`	not current
MSS404061A	Facilitate the use of SCADA systems in a team or work area	`N/A`	not current
MSS404081A	Undertake proactive maintenance analyses	`N/A`	not current
MSS404082A	Assist in implementing a proactive maintenance strategy	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT40307 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.