When must new enrolments into LMT40707 stop?

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT40707?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT40707 Certificate IV in Millinery

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT40707Superseded — equivalentCertificate IV in Millinery
equivalent
MST40416CurrentCertificate IV in Millinery

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT40707MST40416equivalent3 July 2016
Supersedes and is equivalent to LMT40707 Certificate IV in Millinery

Is LMT40707 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT40707 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT40707 is made of

training.gov.au lists 46 units for LMT40707. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 46 listed

Code	Unit	Core or elective	In this product
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTCL2005B	Use specialised machinery or processes to assist assembly production	`N/A`	not current
LMTCL2011B	Draw and interpret a basic sketch	`N/A`	not current
LMTCL2018B	Perform basic maintenance of headwear	`N/A`	not current
LMTFD3001B	Market design product to local outlets	`N/A`	not current
LMTGN2001B	Follow defined OHS policies and procedures	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2004B	Work in a team environment	`N/A`	not current
LMTGN2005B	Perform minor maintenance	`N/A`	not current
LMTGN2006B	Perform test or inspection to check product quality	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN2010B	Perform tasks to support production	`N/A`	not current
LMTGN3002B	Organise and plan own work to achieve planned outcomes	`N/A`	not current
LMTGN3003B	Estimate and cost job	`N/A`	not current
LMTGN3008A	Draw 3D designs	`N/A`	not current
LMTGN4010A	Implement and monitor OHS in the workplace	`N/A`	not current
LMTML2001A	Identify materials used in millinery	`N/A`	not current
LMTML2002A	Make flat patterns for millinery	`N/A`	not current
LMTML2003A	Produce and attach millinery trims	`N/A`	not current
LMTML2004A	Produce felt for millinery	`N/A`	not current
LMTML2005A	Place and cut millinery patterns	`N/A`	not current
LMTML2006A	Use millinery steaming and pressing equipment	`N/A`	not current
LMTML2007A	Block and shape millinery by hand	`N/A`	not current
LMTML2008A	Assemble simple blocked millinery components	`N/A`	not current
LMTML2009A	Apply millinery sewing and adhesion techniques	`N/A`	not current
LMTML2010A	Make millinery with flat pattern components	`N/A`	not current
LMTML3001A	Make flat patterns from hat blocks	`N/A`	not current
LMTML3002A	Block and shape complex millinery	`N/A`	not current

Show the remaining 16 units

Code	Unit	Core or elective	In this product
LMTML3003A	Make millinery using patterns derived from hat block	`N/A`	not current
LMTML3004A	Identify performance and handling requirements of millinery materials	`N/A`	not current
LMTML3005A	Use skin, fur or leather in millinery products	`N/A`	not current
LMTML3006A	Assemble complex blocked millinery components	`N/A`	not current
LMTML4001A	Undertake specific millinery construction techniques	`N/A`	not current
LMTML4002A	Rejuvenate millinery	`N/A`	not current
LMTML4003A	Present and display millinery	`N/A`	not current
LMTML4004A	Manage millinery procurement and cost millinery products	`N/A`	not current
LMTML4005A	Undertake initial millinery consultation, subsequent fittings and finishing	`N/A`	not current
LMTML4006A	Sketch and prepare millinery fashion designs	`N/A`	not current
LMTML4007A	Make millinery patterns	`N/A`	not current
LMTML4008A	Undertake couture millinery	`N/A`	not current
LMTML4009A	Modify millinery blocks to make new shapes	`N/A`	not current
LMTML4010A	Make couture trims	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT40707 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.