When must new enrolments into LMT60307 stop?

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT60307?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT60307 Advanced Diploma of Applied Fashion Design and Technology

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT60307Superseded — not equivalentAdvanced Diploma of Applied Fashion Design and Technology
not equivalent
MST60116Superseded — equivalentAdvanced Diploma of Applied Fashion Design and Merchandising
equivalent
MST60119Superseded — not equivalentAdvanced Diploma of Applied Fashion Design and Merchandising
not equivalent
MST60122CurrentAdvanced Diploma of Apparel, Fashion and Textiles

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT60307MST60116not equivalent3 July 2016
Supersedes: LMT60307 Advanced Diploma of Applied Fashion Design and Technology; LMT60507 Advanced Diploma of Fashion and Textiles Merchandising. Not equivalent

Is LMT60307 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT60307 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT60307 is made of

training.gov.au lists 64 units for LMT60307. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 64 listed

Code	Unit	Core or elective	In this product
LMTCL2003B	Identify fibres and fabrics	`N/A`	not current
LMTCL2004B	Sew components	`N/A`	not current
LMTCL2010B	Modify patterns to create basic styles	`N/A`	not current
LMTCL2011B	Draw and interpret a basic sketch	`N/A`	not current
LMTCL3001B	Identify fabric performance and handling requirements	`N/A`	not current
LMTCL3009B	Develop patterns from a block using basic patternmaking principles	`N/A`	not current
LMTFD2005B	Identify design process for fashion designs	`N/A`	not current
LMTFD3004B	Draw a trade drawing for fashion design	`N/A`	not current
LMTFD4001B	Apply design studio process	`N/A`	not current
LMTFD4002B	Apply principles of colour theory to fashion design development	`N/A`	not current
LMTFD4003B	Assist in preparation of preliminary design concepts	`N/A`	not current
LMTFD4004B	Calculate cost estimates for fashion products	`N/A`	not current
LMTFD4005B	Communicate and sell design concepts	`N/A`	not current
LMTFD4006B	Interact and network with fashion industry participants	`N/A`	not current
LMTFD4007B	Conduct quality assurance for patterns and garments	`N/A`	not current
LMTFD4008B	Construct stock size block for garment to meet size and fit specifications	`N/A`	not current
LMTFD4010B	Create pattern to meet design specifications applying advanced pattern-making principles	`N/A`	not current
LMTFD4011B	Cut fabrics for prototype designs	`N/A`	not current
LMTFD4012B	Develop product specifications for fashion design	`N/A`	not current
LMTFD4013B	Grade 2D patterns	`N/A`	not current
LMTFD4014B	Identify influences on contemporary fashion designs and construction techniques	`N/A`	not current
LMTFD4015B	Create pattern from block to meet customer specifications	`N/A`	not current
LMTFD4016B	Sew design prototypes	`N/A`	not current
LMTFD4017B	Source materials and resources for production of fashion designs	`N/A`	not current
LMTFD4018B	Use and apply sizing systems appropriate for fashion design	`N/A`	not current
LMTFD4020B	Use electronic fashion design tools	`N/A`	not current
LMTFD4021B	Drape fabrics to make patterns	`N/A`	not current
LMTFD5001B	Design bras and swimwear	`N/A`	not current
LMTFD5002B	Develop and test patterns for bras and swimwear	`N/A`	not current
LMTFD5003B	Analyse fit model	`N/A`	not current

Show the remaining 34 units

Code	Unit	Core or elective	In this product
LMTFD5004B	Develop marketing plans for fashion products	`N/A`	not current
LMTFD5005B	Manipulate fabrics to create new finishes	`N/A`	not current
LMTFD5006B	Evaluate fashion designs against set criteria	`N/A`	not current
LMTFD5007B	Analyse influences on contemporary fashion designs	`N/A`	not current
LMTFD5008B	Conduct fashion design purchasing	`N/A`	not current
LMTFD5009B	Cost design production	`N/A`	not current
LMTFD5010B	Develop and present design concepts within specific guidelines	`N/A`	not current
LMTFD5011B	Produce fashion illustrations	`N/A`	not current
LMTFD5012B	Perform contour draping	`N/A`	not current
LMTFD5013B	Develop merchandising plans for fashion products	`N/A`	not current
LMTFD5014B	Construct complex blocks for fashion garments	`N/A`	not current
LMTFD5015B	Develop patterns for complex fashion garments	`N/A`	not current
LMTFD5016B	Grade shaped patterns	`N/A`	not current
LMTFD5017B	Apply design studio processes to meet client brief	`N/A`	not current
LMTFD5018B	Determine and specify advanced construction processes	`N/A`	not current
LMTFD5019B	Analyse individual fit and make pattern alterations	`N/A`	not current
LMTFD6001B	Evaluate commercial viability of designs	`N/A`	not current
LMTFD6002B	Manage product development of fashion designs	`N/A`	not current
LMTFD6003B	Manage fashion design process	`N/A`	not current
LMTFD6004B	Manage advanced pattern making processes	`N/A`	not current
LMTFD6005B	Drape structured over-garments	`N/A`	not current
LMTFD6006B	Develop a fashion range	`N/A`	not current
LMTFD6007B	Implement specialised pattern-making technologies	`N/A`	not current
LMTFD6008B	Apply studio processes to create and produce designs for commercial production	`N/A`	not current
LMTFD6009B	Analyse fashion industry textiles to guide commercial development	`N/A`	not current
LMTGN2001B	Follow defined OHS policies and procedures	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN5001B	Participate in production planning processes	`N/A`	not current
LMTGN5002B	Coordinate quality assurance for textiles clothing and footwear products and services	`N/A`	not current
LMTGN5003B	Work with international textiles, clothing and footwear supply chains	`N/A`	not current
LMTGN6001B	Develop and implement a sales or marketing plan	`N/A`	not current
LMTGN6003B	Research and evaluate processes and products	`N/A`	not current
LMTGN6004B	Negotiate and manage contracts to produce finished design products	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT60307 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.