MEA303D Remove and install pneumatic system components

Supersededtraining.gov.au: supersededEquivalent

The currency period for MEA303D ended on 10 February 2015 — 11 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 12 February 2016. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MEA11 — Aeroskills Training Package
Currency period ends
10 February 2015
Latest release
Release 2 · 23 August 2013 · 2 releases in all
Supersedes
MEA303C
Superseded by
MEA303 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEA303DSuperseded — equivalentRemove and install pneumatic system components
  2. equivalent
  3. MEA303CurrentRemove and install aircraft pneumatic system components

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEA303CMEA303Dequivalent22 January 2012

    The register records this supersession but attaches no note on what changed.

  • MEA303DMEA303equivalent11 February 2015

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for MEA303D and for its training package MEA11 (release 2.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • MEA303D_R2.pdfMEA303D release 2 · product document · published 24 August 2013
  • MEA303D_R2.docxMEA303D release 2 · product document · published 26 November 2024

Is MEA303D on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEA303D sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEA303D is used

training.gov.au lists MEA303D inside 9 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MEA303D in that product.

Products no longer current 9 listed

The register still records MEA303D inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEA303D is
MEA40711Certificate IV in Aeroskills (Mechanical)Qualificationelective
MEA41311Certificate IV in Aeroskills (Structures)Qualificationelective
MEA50211Diploma of Aeroskills (Mechanical)Qualificationelective
MEASS00130Airframe - B1 Licence Exclusion E40 RemovalSkill setelective
MEASS00135Airframe - B1.1 Licence Exclusion E15 RemovalSkill setelective
MEASS00136Airframe - B1.1 Licence Exclusion E16 RemovalSkill setelective
MEASS00137Airframe - B1.1 Licence Exclusion E2 RemovalSkill setelective
MEASS00140Airframe - B1.1 or B1.3 Licence Exclusions E39 RemovalSkill setelective
MEASS00146Airframe - B1.3 and B1.4 Licence Exclusion E2 RemovalSkill setelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEA training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MEA303D still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.