MEASS00014 Airframe - B1.2 Licence Exclusion E2 Removal

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for MEASS00014 ended on 21 January 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 23 January 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Skill set
Training package
MEA07 — Aeroskills Training Package
Currency period ends
21 January 2012
Latest release
Release 1 · 15 November 2010
Supersedes
nothing — no earlier product listed
Superseded by
MEASS00143 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEASS00014Superseded — not equivalentAirframe - B1.2 Licence Exclusion E2 Removal
  2. not equivalent
  3. MEASS00143Deleted from the registerAirframe - B1.2 Licence Exclusion E2 Removal

The register does not list a current endpoint for this chain: MEASS00143 is the last product it points at, and MEASS00143 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEASS00014MEASS00143not equivalent22 January 2012

    The register records this supersession but attaches no note on what changed.

Is MEASS00014 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEASS00014 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEASS00014 is made of

training.gov.au lists 10 units for MEASS00014. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 10 listed

CodeUnitCore or electiveIn this product
MEA302CRemove and install aircraft hydro-mechanical and landing gear system componentsN/Anot current
MEA304CRemove and install non-pressurised aircraft structural and non-structural componentsN/Anot current
MEA305CRemove and install aircraft fixed wing flight control system componentsN/Anot current
MEA309CInspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and componentsN/Anot current
MEA312CInspect, test and troubleshoot aircraft fixed wing flight control systems and componentsN/Anot current
MEA325BWeigh aircraft and perform aircraft weight and balance calculations as a result of modificationsN/Anot current
MEA328CMaintain and/or repair aircraft mechanical components or partsN/Anot current
MEA339BInspect, repair and maintain aircraft structuresN/Anot current
MEA354AMaintain light aircraft pneumatic systemsN/Anot current
MEA365AAssess structural repair/modification requirements and evaluate structural repairs and modificationsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEA training product on the register · Search all training products

Is MEASS00014 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.