MEM23041A Apply basic scientific principles and techniques in mechanical engineering situations

deletedthe status token training.gov.au records

Item 14

The one year of s 14(1)(c), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in MEM23041A today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for MEM23041A, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Unit of competency
Training package
MEM05 — Metal and Engineering Training Package
Currency period ends
18 December 2012
Latest release
Release 1 · 1 December 2005
Supersedes
nothing — no earlier product listed
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from MEM23041A. There is no chain to follow from here.

What the register says changed

training.gov.au publishes no mapping notes for MEM23041A.

Official documents on the register

What training.gov.au lists for MEM23041A and for its training package MEM05 (release 11.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • MEM23041A_R1.pdfMEM23041A release 1 · product document · published 5 October 2012
  • MEM23041A_R1.docxMEM23041A release 1 · product document · published 1 January 1901

Is MEM23041A on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM23041A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEM23041A is used

training.gov.au lists MEM23041A inside 7 training products, 2 of them current. Every one of them is below, with the register's own core or elective flag for MEM23041A in that product.

Current products 2 listed

CodeTraining productTypeMEM23041A is
MSA50108Diploma of Manufacturing TechnologyQualificationelective
MSA60108Advanced Diploma of Manufacturing TechnologyQualificationelective

Products no longer current 5 listed

The register still records MEM23041A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEM23041A is
MEM50205Diploma of Engineering - TechnicalQualificationelective
MEM50211Diploma of Engineering - TechnicalQualificationelective
MEM60105Advanced Diploma of EngineeringQualificationelective
MEM60111Advanced Diploma of EngineeringQualificationelective
MEM80111Vocational Graduate Diploma of EngineeringQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Take this with you — one email with how the register lists MEM23041A today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MEM23041A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.