When must new enrolments into MEM50211 stop?

New enrolments are not permitted from 20 December 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM50211?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM50211 Diploma of Engineering - Technical

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM50211Superseded — equivalentDiploma of Engineering - Technical
equivalent
MEM50212Superseded — equivalentDiploma of Engineering - Technical
equivalent
MEM50222CurrentDiploma of Engineering - Technical

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM50205MEM50211equivalent15 July 2011
The register records this supersession but attaches no note on what changed.
MEM50211MEM50212equivalent19 December 2012
The register records this supersession but attaches no note on what changed.

Is MEM50211 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM50211 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM50211 is made of

training.gov.au lists 161 units for MEM50211. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 161 listed

Code	Unit	Core or elective	In this product
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
MEA101B	Interpret occupational health and safety practices in aviation maintenance	`N/A`	not current
MEA105C	Apply quality standards applicable to aviation maintenance processes	`N/A`	not current
MEA107B	Interpret and use aviation maintenance industry manuals and specifications	`N/A`	not current
MEA108B	Complete aviation maintenance industry documentation	`N/A`	not current
MEA109B	Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance	`N/A`	not current
MEA270A	Lay out avionic systems	`N/A`	not current
MEA271A	Lay out avionic flight management systems	`N/A`	not current
MEA272B	Apply basic scientific principles and techniques in avionic engineering situations	`N/A`	not current
MEA273A	Select and test avionic engineering materials	`N/A`	not current
MEA340A	Lay out and set up aircraft systems	`N/A`	not current
MEA341A	Apply basic aircraft design characteristics	`N/A`	not current
MEA342A	Apply basic aircraft power plant design characteristics	`N/A`	not current
MEA349B	Apply basic scientific principles and techniques in aeronautical engineering situations	`N/A`	not current
MEA350A	Select and test aeronautical engineering materials	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09141A	Represent mechanical engineering designs	`N/A`	not current
MEM09142A	Represent mechatronic engineering designs	`N/A`	not current
MEM09143A	Represent aeronautical engineering designs	`N/A`	not current
MEM09144A	Represent avionic engineering designs	`N/A`	not current
MEM09202A	Produce freehand sketches	`N/A`	not current
MEM09203A	Measure and sketch site information	`N/A`	not current
MEM09204A	Produce basic engineering detail drawings	`N/A`	not current
MEM09205A	Produce electrical schematic drawings	`N/A`	not current
MEM09206A	Produce drawings for mechanical services	`N/A`	not current
MEM09207A	Produce drawings for reticulated services	`N/A`	not current
MEM09208A	Detail fasteners and locking devices in mechanical drawings	`N/A`	not current
MEM09209A	Detail bearings, seals and other componentry in mechanical drawings	`N/A`	not current
MEM09210A	Create 3-D solid models using computer-aided design (CAD) system	`N/A`	not current
MEM09211A	Produce drawings or models for industrial piping	`N/A`	not current

Show the remaining 131 units

Code	Unit	Core or elective	In this product
MEM09212A	Produce detailed drawings of steel to non-steel connections	`N/A`	not current
MEM09213A	Produce schematic drawings for hydraulic and pneumatic fluid power systems	`N/A`	not current
MEM09214A	Perform advanced engineering detail drafting	`N/A`	not current
MEM09215A	Supervise detail drafting projects	`N/A`	not current
MEM09216A	Interpret and produce curved 3-D shapes and patterns	`N/A`	not current
MEM09217A	Prepare plans for pipe and duct fabrication	`N/A`	not current
MEM09218A	Participate in drafting projects for building services	`N/A`	not current
MEM09219A	Prepare drawings for fabricated sheet metal products	`N/A`	not current
MEM09220A	Apply surface modelling techniques to 3-D drawings	`N/A`	not current
MEM09221A	Create 3-D model assemblies using computer-aided design (CAD) system	`N/A`	not current
MEM09222A	Interpret and maintain or restore original drawings	`N/A`	not current
MEM12005B	Calibrate measuring equipment	`N/A`	not current
MEM12022B	Program coordinate measuring machines (advanced)	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM12025A	Use graphical techniques and perform simple statistical computations	`N/A`	not current
MEM13010A	Supervise occupational health and safety in an industrial work environment.	`N/A`	not current
MEM13013B	Work safely with ionizing radiation	`N/A`	not current
MEM14001B	Schedule material deliveries	`N/A`	not current
MEM14002B	Undertake basic process planning	`N/A`	not current
MEM14003B	Undertake basic production scheduling	`N/A`	not current
MEM14081A	Apply mechanical engineering fundamentals to support design and development of projects	`N/A`	not current
MEM14082A	Apply mechatronics fundamentals to support design and development of engineering projects	`N/A`	not current
MEM14083A	Apply aeronautical engineering fundamentals to support design/development of engineering projects	`N/A`	not current
MEM14084A	Apply avionic engineering fundamentals to support design and development of engineering projects	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM15007B	Conduct product and/or process capability studies	`N/A`	not current
MEM15008B	Perform advanced statistical quality control	`N/A`	not current
MEM15010B	Perform laboratory procedures	`N/A`	not current
MEM15011B	Exercise external quality assurance	`N/A`	not current
MEM15012B	Maintain/supervise the application of quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18016B	Analyse plant and equipment condition monitoring results	`N/A`	not current
MEM22002A	Manage self in the engineering environment	`N/A`	not current
MEM22006A	Source and estimate materials	`N/A`	not current
MEM22009A	Manage technical sales and promotion	`N/A`	not current
MEM23001A	Apply advanced mathematical techniques in a manufacturing engineering or related environment	`N/A`	not current
MEM23002A	Apply calculus in engineering situations	`N/A`	not current
MEM23003A	Operate and program computers and/or controllers in engineering situations	`N/A`	not current
MEM23041A	Apply basic scientific principles and techniques in mechanical engineering situations	`N/A`	not current
MEM23051A	Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations	`N/A`	not current
MEM23052A	Apply basic electro and control scientific principles and techniques in aeronautical engineering	`N/A`	not current
MEM23061A	Select and test mechanical engineering materials	`N/A`	not current
MEM23062A	Select and test mechatronic engineering materials	`N/A`	not current
MEM23071A	Select and apply mechanical engineering methods, processes and construction techniques	`N/A`	not current
MEM23072A	Select and apply mechatronic engineering methods, processes and construction techniques	`N/A`	not current
MEM23073A	Select and apply aeronautical engineering methods, processes and construction techniques	`N/A`	not current
MEM23074A	Select and apply avionic engineering methods, processes and construction techniques	`N/A`	not current
MEM24001B	Perform basic penetrant testing	`N/A`	not current
MEM24002B	Perform penetrant testing	`N/A`	not current
MEM24003B	Perform basic magnetic particle testing	`N/A`	not current
MEM24004B	Perform magnetic particle testing	`N/A`	not current
MEM24005B	Perform basic eddy current testing	`N/A`	not current
MEM24006B	Perform eddy current testing	`N/A`	not current
MEM24007B	Perform ultrasonic thickness testing	`N/A`	not current
MEM24008B	Perform ultrasonic testing	`N/A`	not current
MEM24009B	Perform basic radiographic testing	`N/A`	not current
MEM24010B	Perform radiographic testing	`N/A`	not current
MEM24011B	Establish non-destructive tests	`N/A`	not current
MEM24012C	Apply metallurgy principles	`N/A`	not current
MEM30005A	Calculate force systems within simple beam structures	`N/A`	not current
MEM30006A	Calculate stresses in simple structures	`N/A`	not current
MEM30007A	Select common engineering materials	`N/A`	not current
MEM30008A	Apply basic economic and ergonomic concepts to evaluate engineering applications	`N/A`	not current
MEM30009A	Contribute to the design of basic mechanical systems	`N/A`	not current
MEM30010A	Set up basic hydraulic circuits	`N/A`	not current
MEM30011A	Set up basic pneumatic circuits	`N/A`	not current
MEM30012A	Apply mathematical techniques in a manufacturing engineering or related environment	`N/A`	not current
MEM30013A	Assist in the preparation of a basic workplace layout	`N/A`	not current
MEM30014A	Apply basic just in time systems to the reduction of waste	`N/A`	not current
MEM30015A	Develop recommendations for basic set up time improvements	`N/A`	not current
MEM30016A	Assist in the analysis of a supply chain	`N/A`	not current
MEM30017A	Use basic preventative maintenance techniques and tools	`N/A`	not current
MEM30018A	Undertake basic process planning	`N/A`	not current
MEM30019A	Use resource planning software systems in manufacturing	`N/A`	not current
MEM30020A	Develop and manage a plan for a simple manufacturing related project	`N/A`	not current
MEM30021A	Prepare a simple production schedule	`N/A`	not current
MEM30022A	Undertake supervised procurement activities	`N/A`	not current
MEM30023A	Prepare a simple cost estimate for a manufactured product	`N/A`	not current
MEM30024A	Participate in quality assurance techniques	`N/A`	not current
MEM30025A	Analyse a simple electrical system circuit	`N/A`	not current
MEM30026A	Select and test components for simple electronic switching and timing circuits	`N/A`	not current
MEM30027A	Prepare basic programs for programmable logic controllers	`N/A`	not current
MEM30028A	Assist in sales of technical products/systems	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMC610A	Manage relationships with non-customer external organisations	`N/A`	not current
MSACMC611A	Manage people relationships	`N/A`	not current
MSACMC612A	Manage workplace learning	`N/A`	not current
MSACMS400A	Implement a competitive manufacturing system	`N/A`	not current
MSACMS401A	Ensure process improvements are sustained	`N/A`	not current
MSACMS600A	Develop a competitive manufacturing system	`N/A`	not current
MSACMS601A	Analyse and map a value chain	`N/A`	not current
MSACMS602A	Manage a value chain	`N/A`	not current
MSACMS603A	Develop manufacturing related business plans	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSACMT421A	Facilitate a Just in Time (JIT) system	`N/A`	not current
MSACMT430A	Improve cost factors in work practices	`N/A`	not current
MSACMT432A	Analyse manual handling processes	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSACMT450A	Undertake process capability improvements	`N/A`	not current
MSACMT451A	Mistake proof a production process	`N/A`	not current
MSACMT452A	Apply statistics to processes in manufacturing	`N/A`	not current
MSACMT460A	Facilitate the use of planning software systems in manufacturing	`N/A`	not current
MSACMT461A	Facilitate SCADA systems in a manufacturing team or work area	`N/A`	not current
MSACMT481A	Undertake proactive maintenance analyses	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSACMT620A	Develop quick changeover procedures	`N/A`	not current
MSACMT621A	Develop a Just in Time (JIT) system	`N/A`	not current
MSACMT630A	Optimise cost of product	`N/A`	not current
MSACMT631A	Undertake value analysis of product costs in terms of customer requirements	`N/A`	not current
MSACMT640A	Manage 5S system in a manufacturing environment	`N/A`	not current
MSACMT650A	Determine and improve process capability	`N/A`	not current
MSACMT660A	Develop the application of enterprise systems in manufacturing	`N/A`	not current
MSACMT661A	Determine and establish information collection requirements and processes	`N/A`	not current
MSACMT670A	Develop and manage sustainable energy practices	`N/A`	not current
MSACMT671A	Develop and manage sustainable environmental practices	`N/A`	not current
MSACMT675A	Facilitate the development of a new product	`N/A`	not current
MSACMT681A	Develop a proactive maintenance strategy	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSATCS301A	Interpret architectural and engineering design specifications for structural steel detailing	`N/A`	not current
MSATCS302A	Detail bolts and welds for structural steelwork connections	`N/A`	not current
MSATCS501A	Detail standardised structural connections	`N/A`	not current
MSATCS502A	Detail structural steel members	`N/A`	not current
MSATCS503A	Incorporate structural steel detailing into fabrication and construction project management	`N/A`	not current
MSATCS504A	Detail ancillary steelwork	`N/A`	not current
UEPMNT419A	Perform Civil Drafting	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM50211 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.