When must new enrolments into MEM50212 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM50212?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM50212 Diploma of Engineering - Technical

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM50212Superseded — equivalentDiploma of Engineering - Technical
equivalent
MEM50222CurrentDiploma of Engineering - Technical

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM50211MEM50212equivalent19 December 2012
The register records this supersession but attaches no note on what changed.
MEM50212MEM50222equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM50212 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM50212 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM50212 is made of

training.gov.au lists 187 units for MEM50212. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 187 listed

Code	Unit	Core or elective	In this product
CPCCOHS1001A	Work safely in the construction industry	`N/A`	not current
CPPBDN5013A	Develop and collaborate on building information models for small-scale building design projects	`N/A`	not current
MEA101B	Interpret occupational health and safety practices in aviation maintenance	`N/A`	not current
MEA105C	Apply quality standards applicable to aviation maintenance processes	`N/A`	not current
MEA107B	Interpret and use aviation maintenance industry manuals and specifications	`N/A`	not current
MEA108B	Complete aviation maintenance industry documentation	`N/A`	not current
MEA109B	Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance	`N/A`	not current
MEA270A	Lay out avionic systems	`N/A`	not current
MEA271A	Lay out avionic flight management systems	`N/A`	not current
MEA272B	Apply basic scientific principles and techniques in avionic engineering situations	`N/A`	not current
MEA273A	Select and test avionic engineering materials	`N/A`	not current
MEA340A	Lay out and set up aircraft systems	`N/A`	not current
MEA341A	Apply basic aircraft design characteristics	`N/A`	not current
MEA342A	Apply basic aircraft power plant design characteristics	`N/A`	not current
MEA349B	Apply basic scientific principles and techniques in aeronautical engineering situations	`N/A`	not current
MEA350A	Select and test aeronautical engineering materials	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09011B	Apply basic engineering design concepts	`N/A`	not current
MEM09143A	Represent aeronautical engineering designs	`N/A`	not current
MEM09144A	Represent avionic engineering designs	`N/A`	not current
MEM09155A	Prepare mechanical models for computer-aided engineering (CAE)	`N/A`	not current
MEM09156A	Prepare mechatronic models for computer-aided engineering (CAE)	`N/A`	not current
MEM09157A	Perform mechanical engineering design drafting	`N/A`	not current
MEM09158A	Perform mechatronics engineering design drafting	`N/A`	not current
MEM09202A	Produce freehand sketches	`N/A`	not current
MEM09203A	Measure and sketch site information	`N/A`	not current
MEM09204A	Produce basic engineering detail drawings	`N/A`	not current
MEM09205A	Produce electrical schematic drawings	`N/A`	not current
MEM09206A	Produce drawings for mechanical services	`N/A`	not current
MEM09207A	Produce drawings for reticulated services	`N/A`	not current

Show the remaining 157 units

Code	Unit	Core or elective	In this product
MEM09208A	Detail fasteners and locking devices in mechanical drawings	`N/A`	not current
MEM09209A	Detail bearings, seals and other componentry in mechanical drawings	`N/A`	not current
MEM09210A	Create 3-D solid models using computer-aided design (CAD) system	`N/A`	not current
MEM09211A	Produce drawings or models for industrial piping	`N/A`	not current
MEM09212A	Produce detailed drawings of steel to non-steel connections	`N/A`	not current
MEM09213A	Produce schematic drawings for hydraulic and pneumatic fluid power systems	`N/A`	not current
MEM09214A	Perform advanced engineering detail drafting	`N/A`	not current
MEM09215A	Supervise detail drafting projects	`N/A`	not current
MEM09216A	Interpret and produce curved 3-D shapes and patterns	`N/A`	not current
MEM09217A	Prepare plans for pipe and duct fabrication	`N/A`	not current
MEM09218A	Participate in drafting projects for building services	`N/A`	not current
MEM09219A	Prepare drawings for fabricated sheet metal products	`N/A`	not current
MEM09220A	Apply surface modelling techniques to 3-D drawings	`N/A`	not current
MEM09221A	Create 3-D model assemblies using computer-aided design (CAD) system	`N/A`	not current
MEM09222A	Interpret and maintain or restore original drawings	`N/A`	not current
MEM12005B	Calibrate measuring equipment	`N/A`	not current
MEM12022B	Program coordinate measuring machines (advanced)	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM12025A	Use graphical techniques and perform simple statistical computations	`N/A`	not current
MEM13010A	Supervise occupational health and safety in an industrial work environment.	`N/A`	not current
MEM13013B	Work safely with ionizing radiation	`N/A`	not current
MEM14001B	Schedule material deliveries	`N/A`	not current
MEM14002B	Undertake basic process planning	`N/A`	not current
MEM14003B	Undertake basic production scheduling	`N/A`	not current
MEM14083A	Apply aeronautical engineering fundamentals to support design/development of engineering projects	`N/A`	not current
MEM14084A	Apply avionic engineering fundamentals to support design and development of engineering projects	`N/A`	not current
MEM14085A	Apply mechanical engineering analysis techniques	`N/A`	not current
MEM14086A	Apply mechatronic engineering analysis techniques	`N/A`	not current
MEM14087A	Apply manufactured product design techniques	`N/A`	not current
MEM14088A	Apply maintenance engineering techniques to equipment and component repairs and modifications	`N/A`	not current
MEM14089A	Integrate mechanical fundamentals into an engineering task	`N/A`	not current
MEM14090A	Integrate mechatronic fundamentals into an engineering task	`N/A`	not current
MEM14091A	Integrate manufacturing fundamentals into an engineering task	`N/A`	not current
MEM14092A	Integrate maintenance fundamentals into an engineering task	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM15007B	Conduct product and/or process capability studies	`N/A`	not current
MEM15008B	Perform advanced statistical quality control	`N/A`	not current
MEM15010B	Perform laboratory procedures	`N/A`	not current
MEM15011B	Exercise external quality assurance	`N/A`	not current
MEM15012B	Maintain/supervise the application of quality procedures	`N/A`	not current
MEM16003B	Provide advanced customer service	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM16012A	Interpret technical specifications and manuals	`N/A`	not current
MEM16014A	Report technical information	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18016B	Analyse plant and equipment condition monitoring results	`N/A`	not current
MEM22002A	Manage self in the engineering environment	`N/A`	not current
MEM22012A	Coordinate resources for an engineering project or operation	`N/A`	not current
MEM22014A	Coordinate engineering-related manufacturing operations	`N/A`	not current
MEM22015A	Source and estimate engineering materials requirements	`N/A`	not current
MEM22017A	Coordinate continuous improvement and technical development	`N/A`	not current
MEM22018A	Coordinate sales and promotion of engineering-related products or services	`N/A`	not current
MEM23003A	Operate and program computers and/or controllers in engineering situations	`N/A`	not current
MEM23004A	Apply technical mathematics	`N/A`	not current
MEM23006A	Apply fluid and thermodynamics principles in engineering	`N/A`	not current
MEM23007A	Apply calculus to engineering tasks	`N/A`	not current
MEM23052A	Apply basic electro and control scientific principles and techniques in aeronautical engineering	`N/A`	not current
MEM23063A	Select and test mechanical engineering materials	`N/A`	not current
MEM23064A	Select and test mechatronic engineering materials	`N/A`	not current
MEM23073A	Select and apply aeronautical engineering methods, processes and construction techniques	`N/A`	not current
MEM23074A	Select and apply avionic engineering methods, processes and construction techniques	`N/A`	not current
MEM23109A	Apply engineering mechanics principles	`N/A`	not current
MEM23112A	Investigate electrical and electronic controllers in engineering applications	`N/A`	not current
MEM23139A	Design a basic single zone duct distribution system	`N/A`	not current
MEM23140A	Determine operational parameters for building HVAC hydronic systems	`N/A`	not current
MEM23142A	Determine psychrometric processes and system performance	`N/A`	not current
MEM23143A	Apply energy management principles	`N/A`	not current
MEM23145A	Apply codes and regulations to air conditioning designs	`N/A`	not current
MEM23148A	Develop energy management solutions	`N/A`	not current
MEM23151A	Commission and optimise performance of HVACR systems	`N/A`	not current
MEM23152A	Apply principles of refrigeration food storage technology	`N/A`	not current
MEM23154A	Analyse and service HVACR systems	`N/A`	not current
MEM24001B	Perform basic penetrant testing	`N/A`	not current
MEM24002B	Perform penetrant testing	`N/A`	not current
MEM24003B	Perform basic magnetic particle testing	`N/A`	not current
MEM24004B	Perform magnetic particle testing	`N/A`	not current
MEM24005B	Perform basic eddy current testing	`N/A`	not current
MEM24006B	Perform eddy current testing	`N/A`	not current
MEM24007B	Perform ultrasonic thickness testing	`N/A`	not current
MEM24008B	Perform ultrasonic testing	`N/A`	not current
MEM24009B	Perform basic radiographic testing	`N/A`	not current
MEM24010B	Perform radiographic testing	`N/A`	not current
MEM24011B	Establish non-destructive tests	`N/A`	not current
MEM24012C	Apply metallurgy principles	`N/A`	not current
MEM30005A	Calculate force systems within simple beam structures	`N/A`	not current
MEM30006A	Calculate stresses in simple structures	`N/A`	not current
MEM30007A	Select common engineering materials	`N/A`	not current
MEM30008A	Apply basic economic and ergonomic concepts to evaluate engineering applications	`N/A`	not current
MEM30009A	Contribute to the design of basic mechanical systems	`N/A`	not current
MEM30010A	Set up basic hydraulic circuits	`N/A`	not current
MEM30011A	Set up basic pneumatic circuits	`N/A`	not current
MEM30012A	Apply mathematical techniques in a manufacturing engineering or related environment	`N/A`	not current
MEM30013A	Assist in the preparation of a basic workplace layout	`N/A`	not current
MEM30014A	Apply basic just in time systems to the reduction of waste	`N/A`	not current
MEM30015A	Develop recommendations for basic set up time improvements	`N/A`	not current
MEM30016A	Assist in the analysis of a supply chain	`N/A`	not current
MEM30017A	Use basic preventative maintenance techniques and tools	`N/A`	not current
MEM30018A	Undertake basic process planning	`N/A`	not current
MEM30019A	Use resource planning software systems in manufacturing	`N/A`	not current
MEM30020A	Develop and manage a plan for a simple manufacturing related project	`N/A`	not current
MEM30021A	Prepare a simple production schedule	`N/A`	not current
MEM30022A	Undertake supervised procurement activities	`N/A`	not current
MEM30023A	Prepare a simple cost estimate for a manufactured product	`N/A`	not current
MEM30024A	Participate in quality assurance techniques	`N/A`	not current
MEM30025A	Analyse a simple electrical system circuit	`N/A`	not current
MEM30026A	Select and test components for simple electronic switching and timing circuits	`N/A`	not current
MEM30027A	Prepare basic programs for programmable logic controllers	`N/A`	not current
MEM30028A	Assist in sales of technical products/systems	`N/A`	not current
MEM30029A	Use workshop equipment and processes to complete an engineering project	`N/A`	not current
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements	`N/A`	not current
MEM30032A	Produce basic engineering drawings	`N/A`	not current
MEM30033A	Use computer-aided design (CAD) to create and display 3-D models	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSATCS301A	Interpret architectural and engineering design specifications for structural steel detailing	`N/A`	not current
MSATCS302A	Detail bolts and welds for structural steelwork connections	`N/A`	not current
MSATCS501A	Detail standardised structural connections	`N/A`	not current
MSATCS502A	Detail structural steel members	`N/A`	not current
MSATCS503A	Incorporate structural steel detailing into fabrication and construction project management	`N/A`	not current
MSATCS504A	Detail ancillary steelwork	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS403001A	Implement competitive systems and practices	`N/A`	not current
MSS403002A	Ensure process improvements are sustained	`N/A`	not current
MSS403010A	Facilitate change in an organisation implementing competitive systems and practices	`N/A`	not current
MSS403021A	Facilitate a Just in Time system	`N/A`	not current
MSS403030A	Improve cost factors in work practices	`N/A`	not current
MSS403032A	Analyse manual handling processes	`N/A`	not current
MSS403040A	Facilitate and improve implementation of 5S	`N/A`	not current
MSS403051A	Mistake proof an operational process	`N/A`	not current
MSS404050A	Undertake process capability improvements	`N/A`	not current
MSS404052A	Apply statistics to operational processes	`N/A`	not current
MSS404060A	Facilitate the use of planning software systems in a work area or team	`N/A`	not current
MSS404061A	Facilitate the use of SCADA systems in a team or work area	`N/A`	not current
MSS404081A	Undertake proactive maintenance analyses	`N/A`	not current
MSS404082A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSS405001A	Develop competitive systems and practices for an organisation	`N/A`	not current
MSS405002A	Analyse and map a value stream	`N/A`	not current
MSS405003A	Manage a value stream	`N/A`	not current
MSS405010A	Manage relationships with non-customer external organisations	`N/A`	not current
MSS405011A	Manage people relationships	`N/A`	not current
MSS405012A	Manage workplace learning	`N/A`	not current
MSS405020A	Develop quick changeover procedures	`N/A`	not current
MSS405021A	Develop a Just in Time system	`N/A`	not current
MSS405030A	Optimise cost of a product or service	`N/A`	not current
MSS405031A	Undertake value analysis of product or process costs in terms of customer requirements	`N/A`	not current
MSS405040A	Manage 5S system in an organisation	`N/A`	not current
MSS405050A	Determine and improve process capability	`N/A`	not current
MSS405060A	Develop the application of enterprise control systems in an organisation	`N/A`	not current
MSS405061A	Determine and establish information collection requirements and processes	`N/A`	not current
MSS405070A	Develop and manage sustainable energy practices	`N/A`	not current
MSS405075A	Facilitate the development of a new product	`N/A`	not current
MSS405081A	Develop a proactive maintenance strategy	`N/A`	not current
UEPMNT419B	Perform civil drafting	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM50212 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.